The FLMW & FLMH flowmeters can be installed directly in the fluid
line without flow straighteners or special piping.
These flowmeters utilize a spring-and-piston type assembly which enables them to be mounted
in any position and gives immunity from changes in viscosity.
SPECIFICATIONS Measuring Accuracy: ±2.5% of fullscale in the center third of the measuring range; ±4% of fullscale over the entire scale range Repeatability: ±1% fullscale Flow Measuring Range: 0.05 - 150 gpm (0.2 - 560 lpm) Maximum Operating Pressure:
Aluminum and brass monitors:
3500 psig (240 Bar) Stainless steel
monitors: 6000 psig (410 Bar) up to 116°C (240°F) Maximum Operating Temperature:
116°C (240°F) Note: for High Temperature (“-HT”, “-UHT”) Pressure Differential: See graphs Standard Calibration Fluids:
Oil monitors: DTE 25 @ 43°C (110°F),
0.873 sg Water monitors: tap water @ 21°C (70°F), 1.0 sg Maximum Particle Size: 76 microns
Examples of popular models in the "To Order" box. Use the "Part Number Builder" to get
pricing formany other available models.
† All dollar amounts on this site are shown in US currency.
Note: Units come complete with operator’s manual.
For NIST traceable certificate, add “-NIST” and add $200 to price. For operation up to 400°F, add suffix “-HT” to model number. For operation up to 600°F, add suffix “-UHT” to model number. For units with one 10 A @220 Vac Form C relay, add suffix “-R1”. For two such relays, add suffix “-R2”. For units with 4 to 20 mA output powered by 12 to 35 Vdc, add suffix “-MA”. Consult PDF file for additional cost.
For Bi-Directional Flow, add suffix "-BDF "to the part number. For units with a port size of ¼ to ½" add $60 to the price; for units with a port size of ¾ - 1" add $84 to the price, for units over 75GPM with an 1 ¼ port size add $190 to the price. "-BDF "option not available in combination with "-UHT","-R1", "-R2", or "-MA", or on models with 1 1/2" port size..
Select FLMH for Oil Flowmeters FLMW for Water Flowmeters
(2)
NPT
Select 14 for 1/4 in. 38 for 3/8 in. 12 for 1/2 in. 34 for 3/4 in. 10 for 1 in. 114 for 1 1/4 in. 112 for 1 1/2 in.
(3)
Max. Rate GPM
Select 01 for 1 GPM 02 for 2 GPM 05 for 5 GPM 10 for 10 GPM 15 for 15 GPM 20 for 20 GPM 25 for 25 GPM 30 for 30 GPM 40 for 40 GPM 50 for 50 GPM 75 for 75 GPM 100 for 100 GPM 150 for 150 GPM
(4)
Material
Select AL for Aluminum BR for Brass SS for Stainless Steel
(5)
Option
Select Nothing(leave field blank) -HT for Operation up to 400°F -UHT for Operation up to 600°F -R1 for Units with one 10 A @220 Vac Form C relay -R2 for Units with two 10 A @220 Vac Form C relay -MA for Units with 4-20 mA output powered by 12-35 Vdc
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
Keywords:Economical In-line Liquid Flowmeters, flowmeter, flow meter, flow measurement, oil flow, water flow, spring and piston, variable area flow meter, variable area
