High Flowrate Mass Controllers and Meters for All Clean Gases

FMA-700A and FMA-800A

FMA-700A and FMA-800A:High Flowrate Mass Controllers and Meters for All Clean Gases

Click for larger image.

•	±1% Accuracy (Up to 500 SLM), ±0.2% Repeatability
•	Low Cost
•	For Flowrates Up to 1000 SLM
•	Normally Closed Valve for Added Safety
•	Fast Response
•	Altitude Insensitive
•	Removable Sensing Tube Assembly
View related products - Electronic Mass Flowmeters

The OMEGA® FMA-700A and 800A Series mass flowmeters and controllers extend the range of mass flow measurement and control from 0 to 5 SCCM to 1000 SLM with 50:1 turndown capability. Like all mass flow sensors, these new units measure mass flow rate directly, without the need for temperature or pressure corrections.

The FMA-700A and 800A Series work on the heated bypass sensor tube principle. The units feature corrosion resistant stainless steel and FKM construction and a 325 mesh (44 micron) inlet screen to prevent contamination of the sensor. The flow body and valve leak less than 10^-8 atm-cc/sec of helium. In the event of a power failure, the valve is normally closed.

The FMA-78P2 and FMA-78P4 are 2- and 4-channel readout/power supply/setpoint control electronic boxes for use with FMA-700A and 800A Series mass flow sensors. The units feature 000.0 to 102.4% of full scale display, a ±15 Vdc power supply, setpoint potentiometers (for mass flow controllers), power cord, and an electrical connector for hookup of the electronics boxes’ outputs.

The FMA-78P Series rate indicators/electronics packages also have back-panel blend control switches that select independent/slave operations for each channel (channel 1 is the master), and the units include a 0 to 5 Vdc output for each channel for chart recording, data acquisition, or computer interfacing.

SPECIFICATIONS
Accuracy: ±1% full scale (up to 500 SLM), ±2% full scale for 750 to 1000 SLM
Repeatability: ±0.2% full scale
Turndown Ratio: 50:1
Response Time: 2.0 seconds
Analog Setpoint:
   0 to 5 Vdc: Voltage output models
   4 to 20 mA: Current output models
Linear Output:
   Standard: 0 to 5 Vdc into 2000 Ω min.
   Optional: 4 to 20 mA, into 200 to 750 Ω
Max Pressure:
   ††FMA-760A to FMA-772A: 1000 psig
   FMA-773A to 778A: 200 psig
   ††FMA-860A to FMA-874A: 1500 psig
   FMA-875A to FMA-878A: 1000 psig
       †† For maximum pressures up to 3000 psig, consult Flow Engineering for quote.
Pressure Coefficient: 0.1% typical
Differential Pressure:
   FMA-800A Series: 0.5 psid
   FMA-700A Series: No less than 20% of supply pressure, depending on parameters
Temperature Range (Gas and Ambient): -10 to 70°C (14 to 158°F)
Temperature Coefficient: 0.05% full scale/°C
Wetted Parts: 316 SS body and sensing tube assembly, FKM elastomers, other materials available
POWER
Voltage Output Models: 12 Vdc (±5%) or 15 Vdc (±10%)
mA Output Models: 15 Vdc (±5%) or 24 Vdc (±15%)
Current Consumption:
   FMA-800A: <45 mA DC
   FMA-700A: <250 mA DC

To Order (Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Most Popular Models Highlighted!

Part Number	Availability	Price	Description	Qty.

Mass Flowmeters with Compression Fitting Connections

FMA-860A-V	6 Weeks	$1,052.00	1/8", 5 SCCM	qty.

FMA-861A-V	6 Weeks	$982.00	1/4", 10 SCCM	qty.

FMA-861-V		$896.00	1/4", 10 SCCM, requires ±15 Vdc power supply	qty.

FMA-862A-V	6 Weeks	$982.00	1/4", 20 SCCM	qty.

FMA-862-V		$896.00	1/4", 20 SCCM, requires ±15 Vdc power supply	qty.

FMA-863A-V	6 Weeks	$982.00	1/4", 50 SCCM	qty.

FMA-864A-V	6 Weeks	$982.00	1/4", 100 SCCM	qty.

FMA-865A-V	6 Weeks	$982.00	1/4", 200 SCCM	qty.

FMA-866A-V	6 Weeks	$982.00	1/4", 500 SCCM	qty.

FMA-867A-V	6 Weeks	$982.00	1/4", 1 SLM	qty.

FMA-868A-V	6 Weeks	$982.00	1/4", 2 SLM	qty.

FMA-869A-V	6 Weeks	$982.00	1/4", 5 SLM	qty.

FMA-870A-V	6 Weeks	$982.00	1/4", 10 SLM	qty.

FMA-871A-V	6 Weeks	$1,294.00	1/4", 15 SLM	qty.

FMA-872A-V	6 Weeks	$1,294.00	1/4", 20 SLM	qty.

FMA-873A-I	6 Weeks	$1,294.00	1/4", 50 SLM, 4-20 mA output	qty.

FMA-873A-V	6 Weeks	$1,294.00	1/4", 50 SLM	qty.

FMA-874A-I	6 Weeks	$1,316.00	1/4", 100 SLM, 4-20 mA output	qty.

FMA-874A-V	6 Weeks	$1,316.00	1/4", 100 SLM	qty.

FMA-874-I		$1,176.00	1/4", 100 SLM, requires ±15 Vdc power supply, 4-20 mA output	qty.

FMA-875A-I	6 Weeks	$2,038.00	3/8", 200 SLM, 4-20 mA output	qty.

FMA-875A-V	6 Weeks	$2,038.00	3/8", 200 SLM	qty.

FMA-875-V-92%ARGON-8%CO2		$1,862.00	3/8", 200 SLM, requires ±15 Vdc power supply, Calibrated for 92% Argon and 8% CO2	qty.

FMA-876A-I	6 Weeks	$2,268.00	3/8", 500 SLM, 4-20 mA output	qty.

FMA-876A-V	6 Weeks	$2,268.00	3/8" 500 SLM	qty.

FMA-877A-V	6 Weeks	$3,046.00	1/2", 750 SLM	qty.

FMA-878A-V	6 Weeks	$3,360.00	3/4", 1000 SLM	qty.


Mass Flow Controllers with Compression Fitting Connections

FMA-760A-V-(*)	6 Weeks	$1,406.00	1/8", 5 SCCM	qty.

FMA-761A-V-(*)	6 Weeks	$1,276.00	1/4", 10 SCCM	qty.

FMA-762A-V-(*)	6 Weeks	$1,276.00	1/4", 20 SCCM	qty.

FMA-763A-V-(*)	6 Weeks	$1,276.00	1/4", 50 SCCM	qty.

FMA-764A-V-(*)	6 Weeks	$1,276.00	1/4", 100 SCCM	qty.

FMA-765A-V-(*)	6 Weeks	$1,276.00	1/4", 200 SCCM	qty.

FMA-766A-V-(*)	6 Weeks	$1,276.00	1/4", 500 SCCM	qty.

FMA-767A-V-(*)	6 Weeks	$1,276.00	1/4", 1 SLM	qty.

FMA-767-V-METHANE		$3,148.00	1/4", 1 SLM, Calibrated for Methane, requires ± 15 Vdc power supply	qty.

FMA-768A-I		$1,276.00	1/4", 2 SLM, 4-20 mA output	qty.

FMA-768A-V-(*)	6 Weeks	$1,276.00	1/4", 2 SLM	qty.

FMA-769A-V-(*)	6 Weeks	$1,276.00	1/4", 5 SLM	qty.

FMA-770A-V-(*)	6 Weeks	$1,276.00	1/4", 10 SLM	qty.

FMA-771A-V-(*)	6 Weeks	$1,844.00	1/4", 15 SLM	qty.

FMA-772A-V-(*)	6 Weeks	$1,844.00	1/4", 20 SLM	qty.

FMA-772-V-HYDROGEN-50/10PSIG		$1,682.00	1/4", 20 SLM, Calibrated for Hydrogen at 50/10 psig, requires ± 15 Vdc power supply	qty.

FMA-773A-V-(*)		$2,456.00	1/4", 50 SLM	qty.

FMA-773-V-PROPANE		$2,456.00	1/4", 50 SLM, Calibrated for Propane, requires ± 15 Vdc power supply	qty.

FMA-774A-V-(*)	6 Weeks	$2,456.00	1/4", 100 SLM	qty.

FMA-775A-V-(*)	6 Weeks	$2,998.00	3/8", 200 SLM	qty.

FMA-776A-V-(*)	6 Weeks	$3,148.00	3/8", 500 SLM	qty.

FMA-777A-V-(*)	6 Weeks	$3,920.00	1/2", 750 SLM	qty.

FMA-778A-V(*)	6 Weeks	$4,208.00	3/4", 1000 SLM	qty.


Electronic Boxes for voltage output units only

FMA-78P2		$1,258.00	For up to 2 sensors†	qty.

FMA-78P4		Consult sales	For up to 4 sensors†	qty.


Accessories

FMA-78C10		$89.00	10' interconnecting cable with connectors	qty.

FMA-78C25		$130.00	25' interconnecting cable with connectors	qty.

FMA-78C50		$208.00	50' interconnecting cable with connectors	qty.

FPW-15		$79.00	15 Vdc power supply for "A" version only	qty.

† All dollar amounts on this site are shown in US currency.

Note: Comes complete with operator's manual and mating connector.

(*)Replace asterisk in part number with gas name and inlet/outlet pressure.

For 4-20 mA output replace the "-V" suffix with "-I", no additional cost.

NOTE: All flow ranges are specified for Nitrogen or Air. when used for other gases, a correlation factor is used to determine flow rate.

Calibrations done at ambient temperature only (20° or 70°F)

For NIST calibration, add suffix, "-NIST" to model number, add $250 to cost.

†† For maximum pressures up to 3000 pounds, consult Flow Engineering for a quote.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

Ordering Example: (1) FMA-869A-V 5 LPM Max, 1/4" Compression Fitting, 0-5 Volt Output, $982.00, plus (1) FPW-15 15 Vdc Power Supply, $79.00, $982.00 + 79.00 = $1,061.00

Related Links - Manual

Product Manual
Download FMA-700 and FMA-800 Series - Mass Flow Meter/Computer
Download FMA-78P2 and FMA-78P4 - Electronic Boxes

Keywords:High Flowrate Mass Controllers and Meters for All Clean Gases, fluid pressure gauge hydraulic flow control valve hydraulic pressure switches modbus hmi