FMXD11 mixers efficiently mix from
the top of a 55-gallon drum to the
bottom, without requiring removal of
the drum lid. The optional IPS drum
bung adaptor allows fixed mounting
of the mixer to the drum. Mixers
draw approximately 14 gallons of
liquid (750 cp max viscosity, 1.8 S.G.
max density) per minute through
the 2" diameter mixing tube. Fluid
temperature range is 0 to 93°C
(32 to 200°F).
A shaft-mounted turbine inside the
mixing tube rotates at 3450 RPM
(from 300 to 3000 RPM for the air
motor), creating a steady suction
effect at the four upper intake ports.
Liquid is forced down through the
tube and forcefully expelled through
the ports at the bottom of the tube,
breaking up and dissolving settled
particles (maximum solid size is 1⁄8").
FMXD11 mixers work with a
non-vortexing, non-aerating action.
The mixing tubes are just under
1 m (38") long. They have PTFE
bearings at the center and base of
the tube, and a graphite-filled PTFE
seal. The shaft, turbine, mixing tube,
and sleeve are 316 stainless steel.
Mixers are available with either
an air-driven or electric motor.
The air-driven ¾ HP motor
operates with 10 to 15 CFM air
at 3.4 to 6.2 bar (50 to 90 psig),
and includes a flow regulator
and muffler.
The TEFC electric ¼ HP
motors are thermaloverload
protected, and come with an on/off
switch and a 3.6 m (12')
three-wire cord with plug
(FPUD421 supplied
without plug).
CAUTION: DO NOT USE THE AIR MOTOR
WITHOUT THE FMXD3-SK
ANTI-STATIC PROTECTION KIT
MOST POPULAR MODELS HIGHLIGHTED!
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator's manual.
Use the air motor and the FMXD3-SK static protection kit for mixing flammable materials or in explosive environments.
Use a filter/regulator and lubricator in the air supply line if the air is not filtered and lubricated.
* CE certified.
Ordering Example: (1) FMXD11 standard mixing tube , $820.00, plus (1) FMXD11-AM 3/4 HP, 3000 RPM Mixer Motor, $575.00, plus (1) FMXD3-SK Static protection kit , $520.00, plus (1) FPUD345-FL Filter lubricator assembly for air motor, $260.00, $820.00 + 575.00 + 520.00 + 260.00 = $2,175.00
