PLASTIC PADDLEWHEEL FLOWMETERS |
| FPB1400 Series |
|
 |
|
|
|
 |
Fluid flowing through the FPB1400
causes the paddlewheel to spin. As
the magnets embedded in the
paddle spin past the sensor,
electrical pulses are produced in
which frequency is proportional to
the flow rate. The number of pulses
per desired time interval and the
K-factor (number of pulses/gallon)
make it is easy to calculate the flow
rate and volume passing through
the unit.
SPECIFICATIONS
Accuracy: ±1% FS
Max Temperature: 60°C (140°F)
Max Pressure: 10 bar (150 psig)
Power: 5 to 24 Vdc @ 2 mA
Output Signal: NPN open collector (load 30 mA max)
Body Dimensions: 56 H x 108 L x 53 mm D (2.2 x 4.25 x 2.2")
Cable: Flow 1.8 m (6'), RTD 0.3 m (1') (-RTD models)
RTD: Platinum 0.00385 TCR, meets EN 60751, Class B (-RTD models)
Max Pressure Drop: 15 psi on size 2 units 20 psi on all other sizes
Viscosity: Calibrated 1 cSt, up to 50 cSt with field calibration
Response Time: At 1 sec 10 to 90% of full scale, at 2 sec below 10% of full scale
Wetted Materials Polypropylene Models
Body: Polypropylene
LID: Acrylic
Paddlewheel: PVDF
Shaft: Nickel tungsten carbide
Bearings: Sapphire jewels
O-Rings: EPDM
RTD: 316 SS casing PVDF Models
Body: PVDF
LID: PVDF
Paddlewheel: PVDF
Shaft: Zirconia ceramic
Bearings: Sapphire jewels
O-Rings: PTFE
RTD: 316 SS casing (-RTD models)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator’s manual.
|
|
|
|
|
|
|
|
Keywords:PLASTIC PADDLEWHEEL FLOWMETERS, liquid flow sensor
|
Back to top
|
