The FPD1000B Series is one of
three compact meters in the oval
gear meter line. Choose from an
aluminum, 316 SS, or PPS
(polyphenylene sulfide resins) body.
The FPD1000B Series can handle
a wide range of fluid viscosities.
SPECIFICATIONS Accuracy: ±1.0% of reading Repeatability: ±0.03% Fitting Type: NPT (female) Dimensions: 65 L x 50 mm H (2.58 x 1.97") Sensor Options: Reed switch (2-wire SPST reed switch NO, 3 watts rated, 150 Vdc max) and Hall-effect sensor (25 mA NPN open collector) Hall-Effect Sensor Power Requirements: 4.5 to 24 Vdc (4.6 to 9 mA) Output Options: Pulse output,standard; optional 4 to 20 mA transmitter (-A models) Display: 6-Digit Maximum Viscosity: 1000 cP, standard; optional 1,000,000 cP high-viscosity rotor (-HV) for 316 SS and aluminum models Maximum Pressure: Aluminum Models: 150 psi Stainless Steel Models: 800 psi* Strainer Size: 200 mesh [handles particle sizes to 0.127 mm (0.005")] Mounting: Shafts must be in a horizontal plane. Strain Relief: Hubble PG7 Electrical Connections: Female 1.2-20 UNF-2B Cable: Belden 9363 Cable Length: 6 m (20') Mounting: Wall, panel or pipe Power Supply: -TX Models: 2-wire, loop powered -BAT Models: 9 Vdc lithium battery Configuration: 2 Totals (1 cumulative, 1 batch) Rate (GAL, LTR, 2 user-defined) Operating Ambient: -18 to 60°C (0 to 140°F) Materials: Enclosure: Acetal, amorphous nylon (display units only), silicone, polyester Seals: FKM Fasteners: Stainless steel Cable Insulation: PVC Shipping Weight: 0.9 kg (2 lbs) Enclosure: NEMA 4X (IP66)
* Stainless Steel Models without the "-IP" option delivered prior to January 1, 2010 have a rating of 150 psi. Only stainless steel models delivered after January 1, 2010 can be used to 800 psi.
† All amounts shown in USD Note: Comes complete with operator’s manual.
Aluminum models are not recommended for water applications.
* Stainless Steel Models, without the "-IP" option, delivered prior to January 1, 2010 are rated only to 150 psi.
For Perfluoroelastomer O-rings add suffix "-K" to model number, and $109 to price.
For 1,000,000 cP high-viscosity rotor option add suffix "-HV" to model number, and $404 to price (-HV option available on FPD1003B, FPD1203B and FPD1103B series only).
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)