High Accuracy Pitot Tubes for Wet Tap Installations |
| FPT-6300 |
|
 |
|
|
High Accuracy Pitot Tubes for Wet Tap Installations
 |
| Click for larger image. |
|
|
|
|
|
|
 |
The FPT-6300 averaging pitot tube is similar to the FPT-6100 in performance, but features a wet-tap assembly
which permits installation and removal of the sensor in pressurized lines without process shutdown. The weld
coupling is first welded into place, then the ball valve and packing are put in place. Next, a drill is used to
drill out the pipe. The drill is partially withdrawn and the ball valve is closed. The drill may then be
completely removed and the sensing tube partially installed in the assembly. Finally, the ball valve is opened
and the sensing tube is inserted into the flowstream. The FPT-6300 is ideal for retrofits on critical
flowstreams.
Complete this questionnaire to size the Pitot tube for your
application.
SPECIFICATIONS
Accuracy: Up to 1% of rate (see sizing). (Accuracy stated is for use in schedule 40 pipe. If used in schedule 80 pipe, add 1% to accuracy or
request special construction)
Repeatability: ±0.1% of rate
Max Temperature and Pressure: 88°C(190°F) at 150 psig operating; 88°C(190°F) at 100 psig during insertion/removal
Unrecoverable Pressure Drop (inches H2O): = DP x (CP/D)
where: DP = generated differential pressure (inches H2O)
CP = pressure loss coefficient
= 0.296 for 3⁄8" diameter probe
= 0.387 for ½"
= 0.757 for ¾"
= 0.945 for 1"
D = inside pipe diameter (inches)
Wetted Parts: carbon steel weld coupling and pipe fittings, brass ball valve and packing, and Zytel ferrule. For 316 SS construction,
consult Flow Engineering Dept.
Sizing Equations
1. Any Liquid: ΔP (inH2O) = Q2(GPM) x Sf / K2 x D41 x 32.14
2. Steam or Any Gas (steam requires min ΔP of 10" H2O): ΔP (in. H2O) = Q2(lb/hr) / K2 x D41 x ρ x 128,900
3. Any Gas: ΔP (inH2O)= Q2 (scfm) x SS x (T + 460) / K2 x D41 x P x 16,590
Where:
ΔP = differential pressure (in inches H2O)
Q = flowrate
K = flow coefficient (see "how to order")
D1 = inside diameter of line size (in inches for square and rectangular ducts use): D1 = √(4 x height x width / Π)
P = static line pressure (psia)
T = temperature (in °F)
ρ = density of medium (in pounds per cubic foot)
Sf = Sp. Gr. at flowing conditions
Ss = Sp. Gr. at 15°C (60°F)
NOTE: Use of these equations for liquids yields an accuracy of ±2% of rate.
When used for steam, accuracy is ±10% of rate (when steam tables are used). Gas equation yields ±2%
of rate accuracy from 21 to 204°C (70 to 400°F) and 0 to 150 psig (when gas is not near its critical
point). A ±1% of rate accuracy requires the use of more precise equations which account for shift in K
with change in flowrate, gas compressibility, etc. Request a precision flow calibration sheet and please supply
the following data: name of fluid, specific gravity, pressure, temperature, inside pipe diameter, viscosity,
steam quality, degrees superheat, and ratio of specific heat at constant pressure to that at constant volume (for
gas velocities approaching 500 fps).
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator's manual.
Ordering Example: (1) FPT-6310 Wet tap installation Pitot Tube for 1" line, $387.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
 |
PX760 Series:
|
|
Differential Pressure Transmitter
Discontinued Product
|
|
|
|
|
|
|
|
|
 |
|
|
