TFE TURBINE METERS |
| FTB-1200 Series |
|
 |
|
|
|
|
|
$
1,989.00
FTB-1201
|
| • |
±1% of Reading Accuracy
|
| • |
All Wetted Parts Including Flowmeter Liner
are TFE Recommended for Corrosive
Service and Ultra Pure Water
Flow Applications
|
| • |
Suitable for Clean Liquid Service
|
| • |
Supplied with 316 SS Flowmeter Housing
and 150 ANSI Flanges
|
| • |
Compatible with Signal Conditioners
|
View related products - Turbine and Paddle Wheel Flowmeters
|
| |
|
|
|
 |
All wetted parts of OMEGA’s FTB-1200 Series turbine meters are
TFE including liner in the flowmeter housing. Magnets are
embedded in the TFE blades of the rotor assembly.
Within the turbine flowmeter, the flowing medium engages a
vaned rotor causing it to rotate at an angular velocity proportional to
the flowrate. The pickup coil senses the spinning motion of the rotor
through the housing and converts it into a pulsing electrical signal.
Totalling the pulsing electrical signal directly yields to the total flow,
while the frequency is linearly related to the flowrate. Sleeve-type
bearing, rotor, cones and flow straightening sections are made of
machined TFE . 150# ANSI flange size available in sizes from
1 /4 to 3". The TFE series offers a linearity of ±1% of reading and
a repeatability of ±0.1% of reading.
Please download
PDF below for complete product specifications
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: To order with Signal Conditioner, specify: SYS/FTB-12**/Signal Conditioner number. Example: SYS/FTB-1201/FLSC-28, 1 / 4 " turbine flowmeter plus 0 to 5 Vdc scaled frequency pulse output signal conditioner.
* Units are only compatible with integral mount signal conditioners FLSC-51 and FLSC-51B.
Comes with complete operator’s manual and NIST 10-point Calibration Certificate for 1 CK for water.
|
|
|
|
|
|
|
|
Back to top
|
