Economical Ball Bearing Turbine Flowmeters With 37° Flare Fittings |
| FTB-200 Series |
|
 |
|
|
|
|
|
$
1,179.00
FTB-201
|
| • |
±0.5% of Reading Accuracy
|
| • |
Ball Bearing Design for Economy
|
| • |
Deflector Cones Stabilize Low Mass Rotor for Increased Bearing Life
|
| • |
NIST Certificate Included for Water
|
View related products - Water Meters
|
| |
|
|
|
 |
OMEGA® FTB-201 Series turbine meters have male flared-end fittings for easy connections.
They are built to meet the performance requirements of MS 33656, though they do not carry a military
specification. These units come with a mating 2-wire connector and can be supplied with the integrally
mounted signal conditioners (Please see the FLSC-18B
Series for more information) to provide 4 to 20 mA, 0 to 5V, and factored pulse outputs.
37° Flare Installation Kits
Proper application of a turbine Installation kits for turbine meters with 37° flare end fittings
consist of two lengths of stainless steel tubing cut to a length appropriate for the upstream and
downstream straight pipe runs and flared at one end. Mating sleeves and nuts are included. The kits can
be conveniently butt-welded into the piping system. Flow straightening sections may be provided with the
installation kit. These kits are available in tubing sizes from ½ to 2".
These turbine meters are intended for clean fluid service only; where there is any doubt concerning
possible particulate impurities in the process fluid, strainers are recommended. In addition, when
using these units for fluids with viscosities other than 1 centistoke, special calibrations and
universal viscosity curves are available–consult OMEGA’s Flow Engineering Department.
SPECIFICATIONS
Accuracy: ±0.5% of reading
Repeatability: ±0.1% of reading
Temperature Range: -268 to 232°C (-450 to 450°F)
Maximum Intermittent Overrange: 150% of maximum range
Materials of Construction:
Body: 304 SS;
Rotor: 17-4 PH SS
Bearings: 440C SS
Installation Kits: 340 SS, 1.7 mm (0.065") thick
Electrical: Two-wire connector, included
Max Pressure Drop: 0.34 bar (5 psi)
| Model No. |
37° Flare
Fitting Size |
Linear Range
Water |
Max
Operating Pressure |
Length |
Nominal
K-Factor
pulses/gal |
Weight
kg (lb) |
| FTB-201 |
3/4-16 UNF-3A |
0.35 to 3.5 GPM |
5000 psi |
62 mm (2.45") |
13,000 |
0.4 kg
(1 lb) |
| FTB-202 |
3/4-16 UNF-3A |
0.75 to 7.5 GPM |
5000 psi |
62 mm (2.45") |
10,000 |
0.4 kg
(1 lb) |
| FTB-203 |
3/4-16 UNF-3A |
1.25 to 9.5 GPM |
5000 psi |
62 mm (2.45") |
6,000 |
0.4 kg
(1 lb) |
| FTB-204 |
7/8-14 UNF-3A |
1.75 to 16 GPM |
5000 psi |
70 mm (2.75") |
4,100 |
0.4 kg
(1 lb) |
| FTB-205 |
1-1/16-12 UNF-3A |
2.5 to 29 GPM |
5000 psi |
83 mm (3.25") |
2,200 |
0.4 kg
(1 lb) |
| FTB-206 |
1-15/16-12 UNF-3A |
4 to 60 GPM |
3500 psi |
89 mm (3.50") |
640 |
0.9 kg
(2 lb) |
| FTB-207 |
1-5/8-12 UNF-3A |
6 to 93 GPM |
3000 psi |
99 mm (3.88") |
410 |
0.9 kg
(2 lb) |
| FTB-208 |
1-7/8-12 UNF-3A |
8 to 130 GPM |
2250 psi |
111 mm (4.38") |
230 |
1.4 kg
(3 lb) |
| FTB-209 |
2-1/2-12 UNF-3A |
15 to 225 GPM |
1750 psi |
121 mm (4.75") |
120 |
1.8 kg
(4 lb) |
|
| |
|
|
|
MOST POPULAR MODELS HIGHLIGHTED! |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: If an integral signal conditioner is required please order as a system. Omega will scale the signal conditioner to the turbine meter.
Example: SYS/FTB-201/FLSC-18B, scaled system includes: Signal Conditioner, Enclosure, Turbine Meter and Fitting, $1705.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
|
|
 |
DPF60 Series:
|
|
DPF60 Series Ratemeters, Totalizers and Batch Controllers for Voltage and Current Inputs
|
|
|
|
|
|
|
 |
|
|
