1-888-TC-OMEGA (1-888-826-6342) US and Canada
1-203-359-1660 INTERNATIONAL
Home >> Flow and Level Produ... >> Turbine and Paddle W... >> Turbine Meters >> FTB8000HW Series
 Accessibility  Skip navigation  Site Map  Help  Search field  View shopping cart  View shopping cart  Skip to Navigation

Hot Water Meters for Totalization and Rate Indication with Pulse Output

FTB8000HW Series   
1 year warranty
 
FTB8000HW Series:Hot Water Meters for Totalization and Rate Indication with Pulse Output
Click for larger image.
   
$191.00  FTB8007HW
Flow Rates from 0.22 to 132 GPM
150 psi Maximum Operating Pressure
90°C (194°F) Maximum Operating Temperature
Field-Adjustable Pulse Output (Optional)

View related products - Turbine and Paddle Wheel Flowmeters

Click to scroll below to order See Specs PDF Manuals View a printer friendly page

The FTB8000HW Series meters use the multi-jet principle, which has been an internationally accepted standard for many years. This type of meter is known for its wide range, simplicity, and accuracy in lowquality water. The impeller is centered in a ring of jets, with inlet jets on one level and outlet jets on another. A gear train drives the register totalizer dials. For pulse output, one of the dials is replaced by a gear, which turns a magnet that is detected by an encapsulated sensor threaded into the outside of the lens. Pulse rate is determined by the gear and the dial on which the gear is placed. Changing the pulse rate requires no special tools and can be done in the field.

Mechanically, all FTB8000HW meters are the same. The difference between the -PR, -PT, and standard models is in the sensor. -PR model meters use a solid state, longlasting Hall-effect sensor, which requires power. -PT model meters use a 2-wire reed switch. They provide a dry-contact closure and do not require power. Basic FTB8000HW meters totalize only and do not have an output. Never install water meters above or over areas where leakage would cause damage.

SPECIFICATIONS
Materials:
    Body: Cast bronze
    Internals: Engineered thermoplastic
    Magnet: Permanent ceramic
Max Temperature: 90°C (194°F)
Max Operating Pressure: 150 psi
Accuracy: 1.5% of reading
Sensor:
    -PR: Hall-effect device
    -PT: Reed switch
Max Current: 20 mA
Max Voltage:
    -PR: 24 Vdc
    -PT: 24 Vdc or Vac
Sensor Power (-PR): Minimum 6 mA at 12 Vdc
Cable Length: 4 m (12') standard, 600 m (2000') max
Flow Rates (GPM):
NPT Size ¾ 1 2
Minimum 0.22 0.44 0.88 1.98
Maximum 22 52 88 132


To Order (Specify Model Number)    
 Part Number   Availability   Price   Description    Qty.
 FTB8007HW In Stock   $191.00    3/4NPT, 0.22 to 22 GPM, total only  
 FTB8010HW In Stock   $305.00    1NPT, 0.44 to 52 GPM, total only  
 FTB8015HW In Stock   $585.00    1 1/2NPT, 0.88 to 88 GPM, total only  
 FTB8020HW In Stock   $765.00    2NPT, 1.98 to 132 GPM, total only  
 FTB8007HW-PT In Stock   $240.00    3/4NPT, 0.22 to 22 GPM, 20 Pulse/gallon  
 FTB8010HW-PT In Stock   $335.00    1NPT, 0.44 to 52 GPM, 1 Pulse/gallon  
 FTB8015HW-PT In Stock   $690.00    1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon  
 FTB8020HW-PT In Stock   $865.00    2NPT, 1.98 to 132 GPM, 1 Pulse/gallon  
 FTB8007HW-PR 5 Weeks   $240.00    3/4NPT, 0.22 to 22 GPM, 1 Pulse/gallon  
 FTB8010HW-PR In Stock   $335.00    1NPT, 0.44 to 52 GPM, 1 Pulse/gallon  
 FTB8015HW-PR In Stock   $690.00    1 1/2NPT, 0.88 to 88 GPM, 1 Pulse/gallon  
 FTB8020HW-PR In Stock   $865.00    2NPT, 1.98 to 132 GPM, 1 Pulse/gallon  
All dollar amounts on this site are shown in US currency.

 Note: Comes with 2 MNPT couplings (already installed), 4m (12') cable, and complete operator’s manual.

   
Keywords:Hot Water Meters for Totalization and Rate Indication with Pulse Output, water flow meter, liquid flow sensor, water flow sensors , differential pressure manometer

   Back to topBack to top




MMV | 78 | 022