Digital Hydraulic Tester

HFP Series

Click for larger image.

^$ 2,130.00 HFP-113P

•	±1% FS Accuracy
•	Turbine Flow Sensor Gives Fast Response
•	Large 3-1/2 Digit LCD for Flow or Temperature
•	Large 3 1/2-Digit LCD for Flow or Temperature
•	Toggles Between Power, Flow and Temperature
•	Load Valve Offers Fingertip Control of Pressure to 6000 psi (41.4 MPa)
View related products - Variable Area Flowmeters and Rotameters

The HPF-110/120 series are compact, lightweight, self-contained portable testers with laboratory accuracy. Designed for fast diagnostic troubleshooting of all types of mobile or stationary hydraulic systems and components, makes all flow, pressure and temperature measurements simultaneously from one point. Helical type pressure gauge provides pulsation dampening and high over-pressure capacity. Additional features include pressure relief disc protection, and low battery/overrange indicators. Metric units also available.

The HPF-100 series are all-digital, compact, lightweight, self contained portable hydraulic testers and dynamometers. Designed for fast diagnostic troubleshooting of all types of hydraulic systems and components, including engine-pump combinations. Makes all flow, pressure, temperature and power measurements simultaneously from one point, in either U.S. or metric units (switchable). Silicon strain gauge pressure sensor. This series also offers other standard features of HFP-110/120 series. However, the HFP-100 series is NOT CE rated.

SPECIFICATIONS
Material
Housing: 2024-T351 anodized aluminum
Turbine Rotor: T416 stainless steel
Rotor Supports: 6061-T6 aluminum
Rotor Shaft: T303 stainless steel
Seals: Buna standard; FKM and EPR optional
Ball Bearings: 440 C stainless steel
Hub Cones: 6061-T6 aluminum alloy
Temperature Probe: 12L14 steel (zinc plate, dichromate finish)
Valve Body for 15/30’s: Cold rolled steel; 60/85/200
Body: 12L14
Steel Stem: 303 stainless steel
Poppet: 12L14 steel hardened
Straightening Section:
    15/30: CA360 brass
    60/85/200: 6061-T6 aluminum
Cones: 2024-T4 aluminum
200 GPM (757 LPM): Sleeve—D.O.M. steel tube
Ports: SAE straight thread O-ring boss, female, J1926/1; BSPP ISO1179
Magnetic Pick-Up:
    Body: 12L14 steel, black oxide finish
    Nut: 12L14 steel, zinc plate, dichromate finish
Performance
Electrical Output Signal: Self-generating alternating pulse, 100 mV RMS (100 Hz) min
Flow Accuracy: ±1% of full scale
Repeatability: ±0.2%
Turbine Response: <200 ms
Fluid Temperature Range: -20 to 150°C (-4 to 300°F)
Ambient Temperature Range: -20 to 55°C (-4 to 131°F)
Flow Readout: Linearity and zero shift = ±1-digit
Operating Pressure: Max 6000 psi (414 Bar, 41.4 MPa, 420 kg/cm²)
Fluid Temperature: Max 150°C (300°F)
Readout Accuracy: ±1-digit
Battery Type: 2 "AA" size alkaline; life 50 hours
Dimensions:
    HFP-111/121 thru HFP-114/124: 287 x 279 x 89 mm (11.3 x 11 x 3.5")
    HFP-115, HFP-125: 311 x 298 x 101 mm (12.3 x 11.8 x 4")

MOST POPULAR MODELS HIGHLIGHTED!

To Order (Specify Model Number)

Part Number	Availability	Price	Description	Qty.

Digital Hydraulic Testers-PSI Pressure Scale

HFP-111P		$2,130.00	SAE 12 port - 1 to 15 GPM hydraulic tester with PSI pressure units	qty.

HFP-112P	8 Weeks	$2,130.00	SAE 12 port - 2 to 30 GPM hydraulic tester with PSI pressure units	qty.

HFP-113P		$2,130.00	SAE 16 port - 3 to 60 GPM hydraulic tester with PSI pressure units	qty.

HFP-114P	5 Weeks	$2,130.00	SAE 16 port - 4 to 85 GPM hydraulic tester with PSI pressure units	qty.

HFP-115P	5 Weeks	$2,730.00	SAE 24 port - 7 to 199.9 GPM hydraulic tester with PSI pressure units	qty.

HFP-121P		$2,130.00	G 3/4 port - 4 to 56 LPM hydraulic tester with PSI pressure units	qty.

HFP-122P		$2,130.00	G 3/4 port - 7.5 to 113.6 LPM hydraulic tester with PSI pressure units	qty.

HFP-123P	8 Weeks	$2,130.00	G 1 port - 12 to 227 LPM hydraulic tester with PSI pressure units	qty.

HFP-124P		$2,130.00	G 1 port - 15 to 321 LPM hydraulic tester with PSI pressure units	qty.

HFP-125P	8 Weeks	$2,730.00	G 1 1/2 port - 26 to 757 LPM hydraulic tester with PSI pressure units	qty.


Digital Hydraulic Testers-BAR Pressure Scale

HFP-111B	8 Weeks	$2,130.00	SAE 12 port - 1 to 15 GPM hydraulic tester with BAR pressure units	qty.

HFP-112B	8 Weeks	$2,130.00	SAE 12 port - 2 to 30 GPM hydraulic tester with BAR pressure units	qty.

HFP-113B	8 Weeks	$2,176.20	SAE 16 port - 3 to 60 GPM hydraulic tester with BAR pressure unit	qty.

HFP-114B	8 Weeks	$2,130.00	SAE 16 port - 4 to 85 GPM hydraulic tester with BAR pressure units	qty.

HFP-115B	8 Weeks	$2,730.00	SAE 24 port - 7 to 199.9 GPM hydraulic tester with BAR pressure unit	qty.

HFP-121B	8 Weeks	$2,130.00	G 3/4 port - 4 to 56 LPM hydraulic tester with BAR pressure unit	qty.

HFP-122B	8 Weeks	$2,130.00	G 3/4 port - 7.5 to 113.6 LPM hydraulic tester with BAR pressure unit	qty.

HFP-123B	8 Weeks	$2,130.00	G 1 port - 12 to 227 LPM hydraulic tester with BAR pressure unit	qty.

HFP-124B	8 Weeks	$2,130.00	G 1 port - 15 to 321 LPM hydraulic tester with BAR pressure unit	qty.

HFP-125B	8 Weeks	$2,730.00	G 1 1/2 port - 26 to 757 LPM hydraulic tester with BAR pressure unit	qty.


Digital Hydraulic Testers with Dynamometer

HFP-101		$3,090.00	1 to 15 GPM (4 to 56 LPM) digital with dynamometer	qty.

HFP-102	8 Weeks	$3,090.00	2 to 30 GPM (7.5 to 113.5 LPM) digital with dynamometer	qty.

HFP-103		$3,090.00	3 to 60 GPM (12 to 227 LPM) digital with dynamometer	qty.

HFP-104	8 Weeks	$3,090.00	4 to 85 GPM (15 to 321 LPM) digital with dynamometer	qty.

HFP-105	8 Weeks	$3,530.00	7 to 199.9 GPM (26 to 757 LPM) digital with dynamometer	qty.


Accessories

MN1500		$1.75	Quantity 2 replacement AA batteries	qty.

MN1500-12	1 Week	$6.50	Quantity 12 replacement AA batteries	qty.

† All dollar amounts on this site are shown in US currency.

Note: Comes complete with 2 "AA" alkaline batteries, and operator’s manual.

Ordering Example: (1) HFP-123P 12 to 227 LPM hydraulic tester, G1 port size, Psi pressure units, $2,130.00,

Keywords:Digital Hydraulic Tester, electromagnetic flow meters linear velocity transducer motion control systems ph meter accuracy ph meter probes