The HHTQ88 is a precision test instrument for automotive, automation,
laboratories, and general industrial applications. The unit comes
complete with the torque sensor with built-in 12 mm (0.5") chuck and
chuck key. Three selectable torque units (kgf-cm, lb-in, N-cm) give this
instrument almost universal compatibility with all measuring systems.
The HHTQ88 also has fast and slow sampling rates to fit most
automation applications. The readings are easy to read, displayed in
large 15 mm (0.6") high digits. The RS232 serial interface allows you
to download data for use in your data logging or recording programs.
SPECIFICATIONS
Units: kgf-cm, lb-in, N-cm (N = Newtons)
Range: Up to 15 kgf-cm
Safe Overload: 150% of range
Functions: Auto off (after approx 20 min),
reading hold, min and max
Accuracy: ±1.5% FS +5 digits, 23 ±5ºC,
includes linearity, repeatabilityand hysteresis Operating Temperature: 0 to 50ºC (32 to 122ºF)
Operating Humidity:<80% RH (non-condensing)
Sensor Chuck: 12 mm (0.5")
Power: 9 V alkaline battery (included)
Sampling Time: Fast: Approximately 0.125 sec Slow:
Approximately 0.334 sec
Data Output: RS232 PC serial output
Meter Dimensions: 180 x 72 x 32 mm (7.1 x 2.8 x 1.3")
Sensor Dimensions: 48 D x 160 mm L (1.9 x 6.3")
Meter Weight: 225 g (0.5 lb)
Sensor Weight: 665 g (1.5 lb)
Sensor Cable: 1 m (39")
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with battery, meter, torque sensor, chuck key, hard carrying case and operator’s manual. Ordering Example: (1) HHTQ88 Is a handheld torque meter including sensor and case, $889.00
