All industrial machinery vibrates.
Monitoring the level of vibration is
a useful guide to a machine’s
condition. Poor balance, worn
bearings, misalignments, and
loose fittings in the structure will
increase levels of vibration. By
monitoring vibration levels, you can
determine when machinery needs
maintenance. The HHVB82 vibration meter, with
its magnetic mount vibration sensor,
is the ideal tool for this application.
SPECIFICATIONS
RMS or Peak Vibration Readings (Peak value = 1.414 RMS value)
Acceleration Range: Up to 200 m/sec2
Velocity Range: Up to 200 mm/sec
Frequency Range: 10 Hz to 1 kHz;
sensitivity meets ISO 2954
Functions: Auto off (after approx
20 min), reading hold, record minimum
and maximum
Accuracy: ±5% +2 digits reading,
160 Hz, 80 Hz @ 23 ±5ºC
Calibration Point:Velocity 50 mm/sec
(160 Hz), acceleration 50 m/sec2 (160 Hz)
Operating Temperature: 0 to 50ºC
(32 to 122ºF)
Operating Humidity: <80% RH
(non-condensing)
Power: 9 V alkaline battery (included)
Sampling Time: Approximately 1 sec
Meter Dimensions: 185 H x 78 W x 38 mm D (7.3 x 3.1 x 1.5")
Sensor Dimensions: 16 D x 29 mm H (0.6 x 1.4")
Sensor Cable Length: 1.2 m (4 ft)
Meter Weight: 274 g (0.6 lb)
Sensor Weight: 38 g (0.08 lb)
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with 9 V battery, vibration sensor, cable, magnetic base, rugged case, operator’s manual. Ordering Example: (1) HHVB82 is a hand held vibration meter with magnetic sensor and case,, $699.00
