Miniature Interface Converters |
| IC11A-F and IC11-PLUS |
|
 |
|
|
|
 |
OMEGA’s miniature IC11 converters provides all the
features required of high quality interface converters in a miniature
package and at a low cost!
The IC11 intelligent RS-232 to RS-422/485 converter can be
selected for half/full duplex, and will allow transmission distances
of up to 1220 m (4000').
The IC11 converts an RS-232 signal to RS-422/485.
Simply attach one end to an RS-232 device and connect the other
end (screw terminals) to an RS-422/485 device.
The converter allows data transfer rates up to 120 Kbps. Power is
acquired directly from a computer’s serial port, or using the included
USB-plug cable.
Specifications
Function: RS-232 to RS-422/485 converter
Power: From RS-232 port or external 5 V power
from included USB-plug cable
Transmission: Asynchronous
Operate Mode: Full/half duplex
Data Rate: Up to 120 Kbps
IC11A-F Transmitter/Receiver Control
1) TX Enabled and RX Enabled
2) TX Enabled when RTS is ON, RX Enabled
3) TX Enabled when RTS ON, RX Enabled when RTS OFF
IC11-PLUS Transmitter/Receiver Control:
Automatic
Communication Mode:
IC11A-F: DTE/DCE;
IC11-PLUS:DCE only
Connector: DB25F (includes DB-25M/DB-9F
mini-gender changer)
RS422/485 Connector: 5 screw terminals
Dimensions:
69 mm L x 53 mm W x 22 mm H
(2.7 x 2.1 x 0.9")
Environmental:
0 to 50°C (32 to 122°F),
0 to 90% RH
|
| |
 |
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: Each unit supplied with 1.5 m (5') USB-plug cable, DB-25M/DB-9F mini-gender changer and complete operator’s manual.
|
|
 |
|
 |
|
 |
|
Keywords:Miniature Interface Converters
|
Back to top
|