Big Display Meters & PID Controllers |
| iLD-UTP, iLD-SP |
|
 |
|
|
Big Display Meters & PID Controllers
 |
| Click for larger image. |
|
|
$
795.00
iLD24-UTP
|
| • |
BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LED
|
| • |
BIG 7-segment LEDs, 4-Digits
|
| • |
Program to Change Colors: RED, AMBER, GREEN
|
| • |
Temperature and Process Input
|
| • |
Strain and Process Input
|
| • |
Optional Relays for Alarm and Full PID Control
|
| • |
Communications Via Ethernet, RS-232, RS-485, and MODBUS
|
| • |
Embedded Web Server
|
View related products - Instrumentation for Pressure and Strain Measurements
|
| |
|
|
|
 |
The BIG Displays can handle a wide variety of signal inputs direct from transducer or process transmitters and offer multiple control output options and serial or
Ethernet connectivity for logging the data.
|
|
|
The "Universal Temperature+Process BIG Display" (iLD-UTP) is designed for Thermocouples, RTD's, and Process (DC) Voltage or Current. It handles TEN (10)
thermocouple types: K, J, T, E, R, S, B, C, N, & J DIN. It works with a wide selection of RTD's, both Pt. 0.00385 and 0.00392 curves for 100 Ohm, 500 Ohm, and 1000 Ohm and
it measures with 2, 3, or 4 wire connections for the highest accuracy. This model also measures process voltage: 0-100 mV, 0-1 V, 0-10 V ranges and process current, 0-20
mA (4-20 mA) with built-in excitation of 24 Vdc standard.
|
|
|
|
The "Universal Strain+Process BIG Display" (iLD-SP) handles a wide variety of DC voltage and current outputs from all common load cells, pressure transducers, and
most any strain gage type of transducer. The meter measures input ranges of 0-100 mV, -100 to 1 V, 0-10 V, 0-20 mA (4-20 mA) with built-in excitation of 5 Vdc and 10 Vdc
standard. This model also features Ten (10) Point Linearization enabling accurate measurements from a wide assortment of unique and nonlinear transducers.
The BIG Displays are easy to configure and scale to virtually any engineering units with the push buttons on the front panel, or with a personal computer using the free
configuration software and the optional Ethernet connectivity or Serial Communications. The Ethernet option allows the device to be connected on a standard Ethernet
network and communicates using standard TCP/IP protocol. The Ethernet option (-C4EI) also includes RS-485 (and RS-422) Serial Communications. The serial
communications option (-C24) includes both RS-232 and RS-485 (and RS-422) on one instrument. It communicates with a straightforward ASCII communications protocol,
as well as MODBUS protocol.
Control Functions
The Universal BIG Displays features a choice of two optional outputs: Form C SPDT (single pole double throw) mechanical relays (-3), Solid State Relays (-2)
DC pulse (-4), and/or programmable analog output (-5) selectable as either a controlling function or as retransmission of the process value.
The Universal BIG Displays can control simple manual operation to ON-OFF and full Autotune PID control. (Selectable preset tune, adaptive tune, PID, PI, PD control modes.)
The dual control outputs can be configured for a variety of independent control and alarm applications. The ramp-to-setpoint feature allows the user to define the rate of
rise to setpoint, minimizing thermal shock to the load during start-up. Maximum ramp time: 99.59 (HH.MM), Soak: 00.00 to 99.59 (HH.MM), Damping: 1 to 8 in unit steps.
Input types: 0 to 20 mA, 0 to 100 mV, 0 to 1 V and 0 to 10 Vdc.
For applications that do not require PID control, Universal BIG Displays controllers are available in a special model that offer simplified programming. The Universal BIG
Displays “Simplified Menu” model (specify -SM option) offers simplified programming. The menu flowchart is similar to programmable digital panel meters that are
used for on/off control or alarms. (Please see the Universal BIG Displays operator’s manuals for programming details.)
|
|
Programmable Color Display
The BIG Display can be programmed to change colors between RED, AMBER, and
GREEN at any set point or alarm point. The BIG Display has a wide range of signal inputs as well as control, alarm, and communication outputs including:
RS-232, RS-485, MODBUS, and Ethernet. The device with an embedded Web Server can connect directly to Ethernet/Internet. You can "see" your meter and control your process
through a web browser over the Internet from halfway around the world. With the BIG Display, you can also see your meter from a hundred feet.
The BIG Display can be mounted flush in a panel or surface mounted with the included brackets. The entire BIG Display enclosure provides NEMA 4 (IP65) protection. Whether
panel-mounted or surface-mounted, the BIG Display does not need to go inside a bulky and expensive NEMA enclosure.
|
|
 |
|
Configuration of the iLD-UTP or iLD-SP can be performed using either -C24 or -C4EI options and the configuration software that is available on
our website.
Factory Scaling (-FS) is available if you prefer the unit to be fully configured before shipment.
Please provide your selections for Factory Scaling input settings:
|
|
iLD-UTP-FS |
iLD-SP-FS |
Input Range = Display Range |
Input Range = Display Range |
|
Excitation: 5 V or 10 V |
Example: 4-20 mA = 0 to 100.0 |
Example: 0-30 mVdc = 0 to 100.0; Exc: 10 Vdc |
|
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Size of Digit Display
|
| |
Select
24 for 57 mm (2.25 inch) 4-digit display
44 for 101 mm (4 inch) 4-digit display
|
(2)
|
Input Type
|
| |
Select
UTP for Universal Temperature T/C RTD & Process Inputs
SP for Strain Gage & Process Input
|
(3)
|
Control Outputs
|
| |
Select
Nothing(leave field blank) for No Control Option
-22 for Two Solid State Relays
-23 for One Solid State Relay and Form C SPDT
-24 for 1 SSR and Pulse 10V dc
-33 for 2 Relays - Form C SPDT
-42 for Pulsed 10 V dc and SSR Relay
-43 for Pulsed 10 V dc and Form C Relay
-44 for 2 Pulsed 10 V dc
-52 for Analog Output and SSR
-53 for Analog output and Relay
-54 for Analog output and pulse
|
(4)
|
Communication Options
|
| |
Select
Nothing(leave field blank) for No Communication Option
-C24 for Isolated RS-232 and RS-485/422
-C4EI for Ethernet with embedded Web Server + RS-485/422
|
(5)
|
Menu Option
|
| |
Select
Nothing(leave field blank) for no option
-SM for for Simplified Menu Version ON/OFF Control No PID Control
|
(6)
|
Factory Scaling
|
| |
Select
Nothing(leave field blank) for No Factory Scaling
-FS for Factory Scaling no charge - see chart for required information and examples
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | | | |
|
|
|
|
|
| |
|
|
|
|
|
|
 |
|
|
|
Related Links -
Manual, Related Products
|
|
|
|
|
|
|
|
|
|
Product Manual
|
|
Download
iLD44-UTP-SM - -SM Version (Simplified Menu) Big Display Universal Temp & Process Controller
|
|
Download
iLD44-UTP Big Display - Quick Start Manual Universal Temperature & Process Monitor
|
|
Download
iLD44-UTP - Big Display Universal Temperature & Process Controller
|
|
Download
iLD44-SP - Big Display Universal Strain & Process Monitor
|
|
Download
iLD24-UTP, iLD44-UTP Series Monitor - Big Display Temperature&Process Monitor Manual
|
|
Download
iLD24-SM Series - -SM (Simplified Menu Version) Quick Start Manual iLD Controller
|
|
Download
iLD24 Series Simplified Menu (-SM) - Quick Start Manual iLD Controller Series Simplified Menu (-SM)
|
|
Download
iLD24 Series - Quick Start Manual iLD Monitor Series
|
|
Download
iLD24 Big Display SP Series - Universal Strain & Process Controller
|
|
Download
iLD24 Big Display SP Series - Universal Strain & Process Monitor
|
|
Download
iLD Series - iLD Big Display Monitor/Controller Embedded Ethernet
|
|
Download
iLD Series - iLD Communication Manual
|
|
Download
iLD Big Display Series Controller - Big Display Temperature&Process Controller Manual
|
|
Download
iLD Big Display - Universal Strain&Process Monitor Manual
|
|
Related Products
|
|
|
|
|
|
 |
|
|
