Over-the-side Immersion Heaters for Drum Heating
KBLC & KBLS Series
Over the side Immersion Heaters for Drum Heating
Click for larger image .
$
1,450.00
KBLC-24T2
Low Watt Density: 11 W/in2
Moisture Resistant Terminal Enclosure
Rugged Steel or Stainless Steel Sheathed Elements
2. 2 and 4.4 kW, 240 V, 1 Phase
Built-in Thermostat on Most Models
APPLICATIONS • Melting Wax • Melting Lard • Melting Grease • Melting Coconut Oil and Other Heat Sensitive Materials.
View related products - Immersion Heaters
FEATURES
Light weight and easy to use. Heater is set atop the mass and
then melts its way to the bottom. Steel terminal housing protected by
acid and heat resistant paint. Standard with built-in controls on
most models.
Three temperature ranges:
• T1 — 0 to 100°F
• T2 — 60 to 250°F
• T3 — 200 to 550°F
kW
Volts
W/in2
Dimension In.
AR Thermostat Range °F
Model No.
Wt. lb.
Riser In. (A)
Min. Tank Clearance (B)
KBLC Series — Steel Sheath and Riser
2.2 240 11 36 12 3/4 — KBLC-24 14
2.2 240 11 36 12 3/4 60 to 250°F KBLC-24T2 14
2.2 240 11 36 12 3/4 200 to 550°F KBLC-24T3 14
4.4 240 11 36 17 3/4 — KBLC-28 18
4.4 240 11 36 17 3/4 60 to 250°F KBLC-28T2 18
4.4 240 11 36 17 3/4 200 to 550°F KBLC-28T3 18
KBLS Series — Stainless Steel Sheath and Riser
2.2 240 11 36 12 3/4 — KBLS-244 14
2.2 240 11 36 12 3/4 0-100°F KBLS-244T1 14
2.2 240 11 36 12 3/4 60 to 250°F KBLS-244T2 14
2.2 240 11 36 12 3/4 200 to 550°F KBLS-244T3 14
4.4 240 11 36 17 3/4 — KBLS-288 18
4.4 240 11 36 17 3/4 0-100°F KBLS-288T1 18
4.4 240 11 36 17 3/4 60 to 250°F KBLS-288T2 18
4.4 240 11 36 17 3/4 200 to 550°F KBLS-288T3 18
† All dollar amounts on this site are shown in US currency.
Back to top