Bolt Sensors with Mounting Washers, Metric, 0-500 N to 0-25,000 Newtons |
| LCM900 Series |
|
 |
|
|
|
 |
OMEGA’s LCM900 Series bolt force sensor is a compression load cell designed to measure the clamping force of a bolt. With excellent long term stability and all stainless steel construction, the LCM900 Series delivers high reliability in severe industrial environments. This unit is designed to operate by mounting on a flat surface between two mounting washers (included).
The LCM901 is also available in standard configurations, with 0-2,000 to 0-100,000 lb ranges.
Please see the LC901 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
Excitation: 5 Vdc (10V max)
Output: 2 mV/V nominal
Accuracy: ±3.5% FSO (linearity, hysteresis and repeatability combined)
Zero Balance: ±4% FSO
Operating Temp Range: -54 to 93°C (-65 to 200°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.018% FSO/°C
Span: ±0.036% rdg/°C
Safe Overload: 130% of capacity
Ultimate Overload: 150% of capacity
Bridge Resistance: 120 Ω nominal
Construction: Stainless steel
Electrical Connection: 1.2 m (4') insulated shielded cable
|
| |
|
|
|
MOST POPULAR MODELS HIGHLIGHTED! |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) LCM911-13-130KN is a 130 kN capacity bolt sensor for a 13 mm bolt with a connector installed on the cable, $345.00
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
 |
DP41:
|
|
1/8 DIN High Performance Temperature, Process and Strain Meter
|
|
|
|
|
|
|
|
 |
|
