The LD630 Series current output displacement transmitters have improved IP67-rated sealing, coupled with polymer guides with rigid carriers. These transmitters are accurate and reliable, especially in wet and corrosive conditions.
Output options are either direct-acting 4 to 20 mA or reverse-acting 20 to 4 mA. The direct acting models will have 4 mA output when the guided core is fully out, and the output will increase to 20 mA when fully in.
SPECIFICATIONS Linearity: <0.2% FSO Excitation Voltage: 10 to 30 Vdc Output Ripple: 0.02% FSO Bandwidth: 500 Hz (-3 dB) Storage Temp: -20 to 85°C (-4 to 185°F) Operating Temp: 0 to 65°C (32 to 149°F) Vibration (Sinusoidal Frequency): 10 to 50 Hz: 1 to 10 g rms linear Amplitude 50 Hz to 1 kHz: 10 g rms Amplitude Shock: Drop Testing: 1 m (3') onto hard surface Topple Testing: 10 times each end onto hard surface Cable: PFA, 2 m (6') long Core Material: Nickel-Iron
† All dollar amounts on this site are shown in US currency.
Note: To order reverse-acting version (20 to 4 mA), add suffix "-R" to model number, no additional charge. Ordering Example: (1) LD630-10-R 0 to 10 mm (0 to 0.4") displacement transmitter with reverse 20 to 4 mA output, $535.00