The LVC-152-R capacitance level switch is the perfect switch solution
for conductive coating or scaling type liquids. The LVC-152-R is best
applied in grounded vessels which contain water based, light to
medium coating or scaling type liquids including soap, wastewater
and brine solutions. The LVC-152-R capacitance switch detects the
presence of liquid or air by measuring the conductive or dielectric
values which are present in all materials. The guard circuit rejects the
negative effects of coating build-up on the probe by eliminating the
coating signal path between the active and reference electrodes.
As the probe tip becomes immersed in liquid, the capacitance effect
is greatly increased and the switch changes state.
Warning: Do not install sensor within 15.24 cm (6") of any metal
object.
SPECIFICATIONS Accuracy: ±1 mm (0.04") in water Repeatability: ±0.5 mm (0.02") in water Dielectric Range: >20 constants Conductive Range: >100 micromhos Supply Voltage: 12 to 36 Vdc Consumption: 25 mA max. Relay: GP: 120 Vac/Vdc @ 1 A CE: 60 Vac/Vdc @ 1 A Switch Output: Selectable NO or NC Temperature Rating: -40 to 90°C (-40 to 194°F) Pressure Rating: 150 psi @ 25°C (76°F), derated @ 1.667 psi per °C above 25°C (76°F) Probe Material: Polypropylene Probe Rating: NEMA 6X (IP68) Mounting Threads: ¾ NPT Cable Type: 3 m (10'), 4-wire, 22 gage with ground, shield & PP jacket Dimension: 12.7 cm L (5.0") x ¾ NPT Immersion Length: 7 cm (2.6") from bottom of threads to tip of probe
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with 3 m (10 ft) cable and operator’s manual.
Two extended cable lengths available:
For 7.62 m (25'), add suffix "-25" to model number, add $20 to price.
For 15.24 m (50'), add suffix "-50" to model number, add $40 to price.
Do not install sensor within 15.24 cm (6") of any metal object
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ordering Example: (1) LVC-152-R level switch, PP material with SPST 1 AMP Relay, $255.00
