Liquid Level Transmitters Suitable For Levels to Six Feet

LVR20/30 Series

Click for larger image.

^$ 650.00 LVR21

•	Rugged 316SS Construction
•	4-20 mA or Resistance Output
•	Immune to Changes of Density and Dielectric
•	1 /4 " Resolution
View related products - Level Measurement

The OMEGA® LVR20 and LVR30 Series continuous liquid level sensors operate on a basic voltage divider network principle. As the float rises, a magnet in the float closes a series of reed switches in sequence which varies the tapped-off portion of the voltage divider resistor network. The LVR20 has the basic voltage divider output—the regulated DC voltage input equals the maximum voltage output. The LVR20 has a nominal 1,200 resistance; thus, with a 10 Vdc supply, 8.3 mA of current are required.

The OMEGA® DPF52 or DP24-E panel meters can be used to power and display the resistance from the LVR20; when relays are required, the DP25E-A meter can be used. For maximum accuracy, the readout device for the LVR20 should be zero and span adjusted after wiring is completed to compensate for any effects due to the resistance of the lead wires. The LVR20 can also be made intrinsically safe when used with OMEGA’s intrinsic safety barriers and when properly powered. The LVR30 Series is provided with a signal conditioner to provide a 4-20 mA output when powered by 10-30 Vdc. The LVR30 Series cannot be made intrinsically safe.

All LVR30 units are supplied with a J-box with screw terminal connections. All LVR20 units are supplied without a J-box with 24 inches of bare wire coming out of the top of the unit with a 1?2 MNPT conduit connection. All LVR20 and LVR30 Series units can be wired for increasing output with either increasing or decreasing height of liquid; standard output is increasing output with increasing height. For other lengths, adaptor systems are available. They consist of two parts: the LVR-C coupling (2 x 2 FNPT) and an LVR-A pipe nipple (2 x 2 MNPT) of various lengths to change the insertion depth of the LVR20 or LVR30 sensor. When using the adaptors, a zero offset is introduced into the output signal which must be compensated for in the readout device (for example, the mA signal will not go down to 4 mA, nor will the voltage output go down to zero).

Retaining clip pliers are required to remove the float when using the adaptor system.

To Order (Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Most Popular Models Highlighted!

Part Number	Availability	Price	Description	RoHS	Qty.

Isolated 4 to 20 mA Output and J-box

LVR31		$775.00	1 ft 4-20 mA output		qty.

LVR33		$1,100.00	3 ft 4-20 mA output		qty.

LVR34		$1,250.00	4 ft 4-20 mA output		qty.

LVR35		$1,400.00	5 ft 4-20 mA output		qty.

LVR36		$1,550.00	6 ft 4-20 mA output		qty.


Voltage Divider (Voltage In = Voltage Out)

LVR21		$650.00	1 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.

LVR22		$800.00	2 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.

LVR23		$950.00	3 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.

LVR24		$1,100.00	4 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.

LVR25		$1,250.00	5 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.

LVR26		$1,400.00	6 ft long indicating length, Voltage Divider, Voltage in = Voltage out		qty.


Accessories

LVR-A4	5 Weeks	$12.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 4" indicating length change		qty.

LVR-A6	5 Weeks	$19.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 6" indicating length change		qty.

LVR-A6	5 Weeks	$19.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 6" indicating length change		qty.

LVR-A7	5 Weeks	$30.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 7" indicating length change		qty.

LVR-A9	5 Weeks	$32.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 9" indicating length change		qty.

LVR-A11		$37.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 11" indicating length change		qty.

LVR-A13		$43.00	Pipe Nipple, 304 SS, 150 lb fittings, 2 x 2 MNPT, 13" indicating length change		qty.

LVR-C		$40.00	150 lb 304 SS Coupling, 2 x 2 FNPT		qty.

U24Y175		$169.00	24 Vdc, 175 mA Power Supply		qty.

DPI8		$250.00	1/8 DIN Display Panel Meter		qty.

† All dollar amounts on this site are shown in US currency.

Note: Units come complete with operator's manual.

LVR20 series is supplied without J-Box.

Ordering Example: (1) LVR22 316 SS level sensor with 2 ft long indicatating length, $800.00, plus (1) DPI8 1/8 DIN display panel meter, $250.00, plus (1) U24Y175 24 Vdc power supply, $169.00, $800.00 + 250.00 + 169.00 = $1,219.00

Related Links - Related Products

Related Products

	DPi32, DPi16, DPi8 Series:
	i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Meters with RS232 & RS485 Communications

	DP24-E:
	1/8 DIN Economical Process Meter

	DP25 Series:
	Temperature, Process, Strain, pH or ORP Meters with Optional Relays, Analog Outputs and Display Options

	U24Y101:
	Unregulated Power Supplies

Keywords:Liquid Level Transmitters Suitable For Levels to Six Feet, calibration program remote wireless thermometer