Cart  |  Contact  |  Help  | 
1-888-826-6342  | 
US and Canada1-888-826-6342
International1-203-359-1660

Your One-Stop Source for Process Measurement & Control!

Thermocouple Probes With High Temperature M12 Molded Connectors

M12LCP-KSS-1/4-U-0600

M12LCP-KSS-1/4-U-0600:Thermocouple Probes With High Temperature M12 Molded Connectors

$53.00 M12LCP-KSS-1/4-U-0600

NEW!
  • Type J, K, T, E Thermocouple Calibrations
  • Single and Dual Element Configurations
  • Ungrounded Junctions
  • -50 to 260°C (-58 to 500°F) Connector Temperature Range
  • IP65 Molded 4-Pin M12 Connector
View related products - Thermocouples

Description

Note: These Sensors Require an M12 Extension Cable to Connect the Sensor to Your Instrumentation.

Omega's M12 Thermocouple probes are a convenient way to measure the temperature in your process. These thermocouple probes are available as Type K thermocouples with Inconel 600 sheaths or 304 Stainless Steel Sheaths. Type J, T and E thermocouples are offered in 304 Stainless Steel Sheaths. Standard probe sizes include 1/4" & 1/8" diameter probes 6" long standard, and 3mm & 6mm diameter probes 150 mm long. These thermocouples can also be provided in other lengths.

The sensor can be used as-is or mounted into your process using one of Omega's line of Compression Fittings.

The thermocouple compensated M12 connector offers a quick and reliable method for connecting this sensor to your instrumentation. The M12 connector on these sensors is wired in accordance with the pin out shown in the accompanying figure. This pin out matches the wiring provided on Omega's Molded M12 Thermocouple Extension Cables so that the IEC or ANSI color code is maintained between the sensor and your instrumentation. A selection of Omega's M12 Extension Cables are included in the ordering table below.

Specifications:
  • Type J, K, T, E Thermocouples offered with 304 SST sheath
  • Type K Thermocouples offered with Inconel 600 sheath
  • Thermocouple Output conforms to Special Limits of Error per ANSI/ASTM E230.
  • Fractional sizes are 1/4 and 1/8 inch diameters with standard length of 6 inches.
  • Metric sizes are 6mm and 3mm diameters with standard lengths of 150 mm.
  • Insulation Resistance is 1 gigohm minimum at 100 VDC for ungrounded sensors.


  • Connect your M12 thermocouple probe to one of Omega's wide variety of in-stock controllers, data loggers, hand held thermometers, PLCs or other measurement or process control products to complete your measurement or control system.



    View the Thermocouple Accuracy and Color Code charts
    Place Order(Specify Model Number)
    Part Number/Desc.
    Availability
    Price
    Description
    Qty
    Standard
    M12LCP-JSS-1/8-U-0600
    Star
    Availability:1 week 
    $50.00   
    Probe Length 6", Diameter 1⁄8, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-JSS-1/8-U-1200
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 12", Diameter 1⁄8, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-JSS-1/4-U-0600
    Star
    Availability:1 week 
    $53.00   
    Probe Length 6", Diameter 1⁄4, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-JSS-1/4-U-1200
    Star
    Availability:1 week 
    $56.00   
    Probe Length 12", Diameter 1⁄4, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-KSS-1/8-U-0600
    Star
    Availability:1 week 
    $50.00   
    Probe Length 6", Diameter 1⁄8, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KSS-1/8-U-1200
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 12", Diameter 1⁄8, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KSS-1/4-U-0600
    Star
    Availability:1 week 
    $53.00   
    Probe Length 6", Diameter 1⁄4, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KIN-1/8-U-0600
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 6", Diameter 1⁄8, Thermocouple Calibration K, Sheath Material Inconel 600
     
    M12LCP-KIN-1/8-U-1200
    Star
    Availability:In Stock 
    $54.00   
    Probe Length 12", Diameter 1⁄8, Thermocouple Calibration K, Sheath Material Inconel 600
     
    M12LCP-KIN-1/4-U-0600
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 6", Diameter 1⁄4, Thermocouple Calibration K, Sheath Material Inconel 600
     
    M12LCP-TSS-1/8-U-0600
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 6", Diameter 1⁄8, Thermocouple Calibration T, Sheath Material 304 SST
     
    M12LCP-TSS-1/4-U-0600
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 6", Diameter 1⁄4, Thermocouple Calibration T, Sheath Material 304 SST
     
    M12LCP-ESS-1/8-U-0600
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 6", Diameter 1⁄8, Thermocouple Calibration E, Sheath Material 304 SST
     
    M12LCP-ESS-1/4-U-0600
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 6", Diameter 1⁄4, Thermocouple Calibration E, Sheath Material 304 SST
     
    Metric
    M12LCP-JSS-M3-U-0150
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 150 mm, Diameter 3 mm, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-JSS-M6-U-0150
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 150 mm, Diameter 6 mm, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-JSS-M6-U-0350
    Star
    Availability:In Stock 
    $57.00   
    Probe Length 350 mm, Diameter 6 mm, Thermocouple Calibration J, Sheath Material 304 SST
     
    M12LCP-KSS-M3-U-0150
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 150 mm, Diameter 3 mm, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KSS-M6-U-0150
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 150 mm, Diameter 6 mm, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KSS-M6-U-0250
    Star
    Availability:In Stock 
    $55.00   
    Probe Length 250 mm, Diameter 6 mm, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KSS-M6-U-0350
    Star
    Availability:In Stock 
    $57.00   
    Probe Length 350 mm, Diameter 6 mm, Thermocouple Calibration K, Sheath Material 304 SST
     
    M12LCP-KIN-M3-U-0150
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 150 mm, Diameter 3 mm, Thermocouple Calibration K, Sheath Material Inconel 600
     
    M12LCP-KIN-M6-U-0150
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 150 mm, Diameter 6 mm, Thermocouple Calibration K, Sheath Material Inconel 600
     
    M12LCP-TSS-M3-U-0150
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 150 mm, Diameter 3 mm, Thermocouple Calibration T, Sheath Material 304 SST
     
    M12LCP-TSS-M6-U-0150
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 150 mm, Diameter 6 mm, Thermocouple Calibration T, Sheath Material 304 SST
     
    M12LCP-ESS-M3-U-0150
    Star
    Availability:In Stock 
    $50.00   
    Probe Length 150 mm, Diameter 3 mm, Thermocouple Calibration E, Sheath Material 304 SST
     
    M12LCP-ESS-M6-U-0150
    Star
    Availability:In Stock 
    $53.00   
    Probe Length 150 mm, Diameter 6 mm, Thermocouple Calibration E, Sheath Material 304 SST
     
    All amounts shown in USD
    Note: Options:
  • For Grounded Junction probe, change "U" to "G" in model number with no change in price.

  • For Dual element probes, add "-DUAL" to the end of the Model Number and multiply the price by 1.75.
  • For longer length Type J, 304 Stainless Steel sheathed probes, change the "-0600" or "-0150" in the model number to the required length and add $0.50 per inch (or 25mm) to the price.
  • For longer length Type K, Inconel 600 sheathed probes, change the "-0600" or "-0150" in the model number to the required length and add $0.65 per inch (or 25mm) to the price.


  • Ordering Example: (1) M12LCP-JSS-1/8-U-0600 Probe Length 6, $50.00

    Part Number Builder

    Build Your Part Number Below
    Option Descriptions:


    (1) Thermocouple Calibration select from:
    J for Thermocouple Calibration J
    K for Thermocouple Calibration K
    T for Thermocouple Calibration T
    E for Thermocouple Calibration E

    (2) Sheath Material select from:
    SS for 304 SST
    IN for Inconel 600

    (3) Diameter select from:
    1/8 for 1/8 inch
    1/4 for 1/4 inch
    M3 for 3 mm
    M6 for 6 mm

    (4) Junction Type select from:
    U for Ungrounded Junctions
    G for Grounded Junctions

    (5) Probe Length (Custom lengths available) select from:
    0600 for 6 inch
    1200 for 12 inch
    0150 for 150 mm
    0250 for 250 mm
    0350 for 350 mm

    (6) Dual Element select from:
    Nothing(leave field blank) for Standard
    -DUAL for Dual Element
    Note: All combinations may not be valid, check spec sheet for valid part numbers.
    Related Links
    Related Products:
    M12-FM
    M12-FM
    SHOP NOW →
    Compensated M12 Thermocouple Connectors Field Mount
    M12CM SERIES
    M12CM SERIES
    SHOP NOW →
    M12 Cables with Over Molded and Compensated Connectors for Thermocouples
    M12M Series
    M12M Series
    SHOP NOW →
    Thermocouple Probes with Molded M12 Connectors
    General Thermocouple Specifications
    General Thermocouple Specifications
    SHOP NOW →
    Color Codes for Thermocouples, Wire and Connectors, tolerances, special limits of error, reference guide