Screw Plug Immersion Heaters for Process Water Applications Stainless Steel Elements |
| MTS Series |
|
 |
|
|
Screw Plug Immersion Heaters for Process Water
 |
| Click for larger image. |
|
|
$
435.00
MTS-1000/120
|
| • |
1" NPT Stainless Steel Passivated Screw Plug
|
| • |
Stainless Steel Passivated Elements
|
| • |
High Watt Density (64 to 86 W/in2)
|
| • |
0.75 to 3 kW
|
| • |
Without Thermostat
|
| • |
120 and 240 Volt, Single Phase
|
| • |
General Purpose or Moisture-Resistant/ Explosion-Resistant Terminal Enclosure
|
View related products - Immersion Heaters
|
| |
|
|
|
 |
The OMEGALUX® MTS Series process water immersion heater is available for process water applications.
SPECIFICATIONS
Wattage: 0.75 to 3 kW
Power: 120 and 240 V, 1 phase
Watt Density: 64 to 86 W/in2
Screw Plug: 1 NPT stainless steel passivated screw plug
Enclosures: E1 general purpose, NEMA 1 (IP00) rated, or type E2 moisture-resistant/
explosion-resistant enclosure.2
| kW |
Volts |
W/in2 |
No. Htg.
Elem. |
E1 General Purpose Enclosure1 |
E2 Moisture Resis/Explosion Resis.2 |
Dim. B
cm (in) |
Model No. |
Wt.kg (lb) |
Model No. |
Wt.kg (lb) |
| 0.75 | 120 | 64 | 1 | 16 (6 5/16 ) | MTS-750/* | 0.9 (2) | MTS-750E2/* | 2.3 (5) |
| 0.75 | 240 | 64 | 1 | 16 (6 5/16 ) | MTS-750/* | 0.9 (2) | MTS-750E2/* | 2.3 (5) |
| 1 | 120 | 85 | 1 | 16 (6 5/16 ) | MTS-1000/* | 0.9 (2) | MTS-1000E2/* | 2.3 (5) |
| 1 | 240 | 85 | 1 | 16 (6 5/16) | MTS-1000/* | 0.9 (2) | MTS-1000E2/* | 2.3 (5) |
| 1.25 | 120 | 83 | 1 | 20 (8 1/16) | MTS-1250/* | 0.9 (2) | MTS-1250E2/* | 2.3 (5) |
| 1.25 | 240 | 83 | 1 | 20 (8 1/16) | MTS-1250/* | 0.9 (2) | MTS-1250E2/* | 2.3 (5) |
| 1.5 | 120 | 86 | 1 | 23.5 (9 1/4) | MTS-1500/* | 0.9 (2) | MTS-1500E2/* | 2.3 (5) |
| 1.5 | 240 | 86 | 1 | 23.5 (9 1/4) | MTS-1500/* | 0.9 (2) | MTS-1500E2/* | 2.3 (5) |
| 2 | 120 | 83 | 1 | 31 (12 1/4) | MTS-2000/* | 0.9 (2) | MTS-2000E2/* | 2.3 (5) |
| 2 | 240 | 83 | 1 | 31 (12 1/4) | MTS-2000/* | 0.9 (2) | MTS-2000E2/* | 2.3 (5) |
| 2.5 | 120 | 79 | 1 | 41 (16 1/4) | MTS-2500/* | 0.9 (2) | MTS-2500E2/* | 2.3 (5) |
| 2.5 | 240 | 79 | 1 | 41 (16 1/4) | MTS-2500/* | 0.9 (2) | MTS-2500E2/* | 2.3 (5) |
| 3 | 120 | 78 | 1 | 50 (19 7/8) | MTS-3000/* | 1.4 (3) | MTS-3000E2/* | 2.7 (6) |
| 3 | 240 | 78 | 1 | 50 (19 7/8 ) | MTS-3000/* | 1.4 (3) | MTS-3000E2/* | 2.7 (6) |
* Designate voltage, i.e., “120” for 120 Vac or “240” for 240 Vac.
1 Heaters with general purpose enclosures are UL listed and CSA certified.
2 Heaters with moisture-resistant/explosion-resistant enclosures are CSA NRTL/C certified and are not intended for use in hazardous areas.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) MTS-750/240 0.75 kW heater powered by 240 Vac, $430.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Watts
|
| |
Select
750 for 0.75 kW
1000 for 1 kW
1250 for 1.25 kW
1500 for 1.5 kW
2000 for 2 kW
2500 for 2.5 kW
3000 for 3 kW
|
(2)
|
Enclosure
|
| |
Select
Nothing(leave field blank) for General Purpose Enclosure
E2 for Moisture Resistant/Explosion Resistant
|
(3)
|
Volts
|
| |
Select
120 for 120 Vac
240 for 240 Vac
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| |
|
|
|
|
|
|
|
|
Back to top
|
