Spring Loaded Industrial Thermocouples with Protection Head |
| NB-TBSL Series |
|
 |
|
|
Spring Loaded Industrial Thermocouples with Protection Head
 |
| Click for larger image. |
|
|
$
63.00
NB1-ICIN-116G-12-TBSL
|
| • |
Non-sealed Design For Use With Thermowells
|
| • |
Made with Special Limits of Error Thermocouple Material
|
| • |
Approx. 1/2" of Travel Length
|
| • |
1/2" NPT Mounting Threads Standard
|
| • |
Spring Loaded Provides Tip Contact For Faster Response When Used with Thermowells
|
| • |
Grounded, Ungrounded, and Exposed Thermocouple Junctions Standard
|
| • |
Pressure Inside Head Equals Pressure Around Probe
|
View related products - Thermocouples
|
| |
|
|
|
 |
These spring loaded probe assemblies offer a choice of two styles of protection heads to meet environmental and size requirements. The probes can move up to 1/2 " in the direction of the head's axis. The thermocouples are available in J, K, T or E calibrations, with either 304SS or Inconel® sheathing (high temperature Super OMEGACLAD®XL or 321SS provided on request).
Standard lengths are 12" including 1/2" for the pipe thread in the relaxed state. Other probe lengths are available. Both the thread on the spring loaded probe and the extension wire opening are 1/2" NPT. The NB2 head includes a compression fitting nut and rubber ferrule for 1/8" to 1/4" O.D. wires or tubing.
The moving internal terminal block with attached probe is standard on all models. Consult the Custom Engineering Dept. for price and delivery on a wide variety of non-metallic and other specialized heads.
View the Thermocouple Accuracy and Color Code charts
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Probe length includes approx. 1/2" allowance for threads.
To order probes with lengths other than 12", consult sales for pricing or enter std part number and indicate length desired in "special instructions" when you checkout.
Ordering Example: (1) NB2-CASS-316G-12-TBSL spring-loaded probe with NB2-type aluminum head, type K calibration, 3 / 16 " O.D., 304 SS sheath, 12" L, $64.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Thermocouple Head Type
|
| |
Select
NB1 for Cast Iron
NB2 for Miniture aluminum
|
(2)
|
Thermocouple Type
|
| |
Select
ICIN for J type with inconel sheath
ICSS for J type with 304 stainless sheath
CAIN for K type with inconel sheath
CASS for K type with 304 stainless steel sheath
CXIN for E type with inconel sheath
CXSS for E type with 304 stainless steel sheath
CPIN for T type with inconel sheath
CPSS for T type with 304 stainless steel sheath
|
(3)
|
Sheath Diameter
|
| |
Select
116 for 1/16 inch
18 for 1/8 inch
316 for 3/16 inch
14 for 1/4 inch
|
(4)
|
Thermocouple Junction
|
| |
Select
G for Grounded
U for Ungrounded
E for Exposed
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
|
|
| |
|
|
|
|
|
|
 |
|
|
|
Related Links -
Related Products
|
|
|
|
|
|
|
|
|
|
Related Products
|
|
|
 |
XBTK Series:
|
|
Thermocouple Terminal Blocks Type K, J, E, T, R
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
