and OM-CP-EGGTEMP-RH are
specifically designed to measure
and record the temperature and
humidity of eggs during shipping,
storage and incubation.
The logger thermally responds
to an environment the same way
a real egg does, simulating the
temperature experience of the
temperature data logger is
submersible and can measure
temperatures from 0 to 60ºC
(32 to 140ºF).
temperature and humidity data
logger (not submersible) measures
humidity over 0 to 95% RH range
and temperature from 0 to 60ºC
(32 to 140ºF).
These data loggers have a user
replaceable battery, that typically
lasts up to 1 year. The nonvolatile
memory can hold up to 32,767
readings and will retain data even if
the battery becomes discharged.
Data retrieval is simple. Simply plug
it into an available USB port and our
user-friendly software does the rest.
The software converts a PC into a
real-time strip chart recorder.
Data can be viewed in Celsius
or Fahrenheit, and in graph,
summary or data formats. For
further analysis data can also be
exported to Excel. The storage
medium is non-volatile solid state
memory, providing maximum data
security even if the battery becomes
Temperature Sensor: Internal Semiconductor Temperature Range: 0 to 60ºC (32 to 140ºF) Temperature Resolution: 0.1ºC Calibrated Accuracy: ±0.5ºC
Humidity Sensor: Semiconductor Humidity Range: 0 to 95% RH Humidity Resolution: 0.5% RH Calibrated Accuracy: ±3.0% RH
(±2.0%RH typical @ 25ºC) Specified Accuracy Range: 10 to 40°C, 10 to 80% RH
(2.0% RH typical @ 25°C) Response Time: 90% change in 60 seconds in slow moving air Alarm: Programmable temperature alarm with high and low limits; Alarm
is activated when temperature reaches or exceeds set limits. Activity Indicator: Green LED blinks to indicate device has been
started, red LED blinks if an alarm condition exists. Calibration: Digital calibration through software Calibration Date: Automatically recorded within device Real Time Recording: May be used with PC to monitor and record
data in real time Memory: OM-CP-EGGTEMP: 32,767 temperature readings OM-CP-EGGTEMP-RH: 16,383 temperature
readings and 16,383 humidity readings Reading Rate: 1 reading every 2 seconds to 1 every 12 hours Start Modes: Software programmable immediate start
or delay start up to six months in advance Data Format: Date and time stamped ºC, ºF, K, ºR,
% RH, mg/ml water vapor concentration Battery Type: 2 - 1.55V SR1154W silver oxide
batteries included; user replaceable Battery Life: 1 year typical at 25ºC, 1 minute reading intervals Time Accuracy: ± 1 minute/month at 20ºC Computer Interface: PC serial or USB (interface
cable required); 38,400 baud Software: XP SP3/Vista/7 and 8 (32- and 64-bit) Operating Environment: 0 to 60ºC, (32 to 140ºF) OM-CP-EGGTEMP: 0 to 100% RH OM-CP-EGGTEMP-RH: 0 to 95% RH Submersible: Up to 46 m (150'), (IP68)
(OM-CP-EGGTEMP only) Dimensions: 57.15 L x 42.6 mm dia. (2.25 x 1.68") Weight: 60 g (2.02 oz) Material:
Enclosure: HDPE Logger: 303 Stainless Steel Approvals: CE (OM-CP-EGGTEMP only)
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with two 1.55 V silver oxide batteries. Operator’s manual and USB interface cable are included with the OM-CP-IFC202 software/cable package (required for data logger operation, sold separately). Ordering Example: (1) OM-CP-EGGTEMP-CERT Egg temperature data logger and NIST calibration certificate, $209.00
Keywords:Egg Temperature and Humidity Data Loggers