The OM-CP-LF101A-KIT is a
complete data logging system that
accurately measures and records
leaf wetness. Not only does it record
the presence of water but also logs
the amount of water on the sensor.
The sensor responds to
environments the same way a real
leaf does and can also detect when
ice is present. This low cost system
comes complete with a data logger,
weatherproof enclosure and leaf
wetness sensor.
The OM-CP-LF101A-KIT is ideal for
plant disease forecasting, irrigation
studies and monitoring frost cycles.
It features a multiple start/stop
function, ultra-high speed download
capability, 1,000,000 reading
storage capacity, optional memory
wrap, battery life indicator, optional
password protection, programmable
alarms and more.
An OM-CP-IFC200 interface cable
and software package is required for
use with the OM-CP-LF101A-KIT.
The storage medium is non-volatile
solid state memory, providing
maximum data security even if the
battery becomes discharged. The
device can be started and stopped
directly from your computer and its
small size allows it to fit
almost anywhere.
Specifications DATA LOGGER Measurement Range: Dry: 266 mV typical 100% Saturated: 833 mV typical Resolution: 50 µV Accuracy: ±0.1 mV Specified Accuracy: Nominal range @ 25ºC Temperature Effect on Span/Offset:
<25 µV over -40 to 80ºC (-40 to 176ºF) Probe Measurement Time: 10 ms Probe Power: 2.5 Vdc @ 2 mA to 5 Vdc @ 7 ma Reading Rate: 4 Hz to 1 every 24 hrs Memory: 1,000,000 readings; software configurable
memory wrap; 330,000 readings in multiple start/stop Wrap Around: Yes Start Modes: • Immediate start • Delay start up to 24 months • Multiple pushbutton start/stop Stop Modes: •Manual through software • Timed (specific date and time) Multiple Start/Stop Mode: Start and stop the device
multiple times without having to download data or
communicate with a PC Multiple Start/Stop Mode Activation: To Start the Device:
Press and hold the pushbutton for 5 seconds, the green LED will
flash during this time;
the device has started logging To Stop the Device:
Press and hold the pushbutton for 5 seconds, the red LED will
flash for three seconds
and then the green LED will flash for two
seconds; the device has stopped logging Real Time Recording: The device may be used with PC to monitor and
record data in real-time LED Functionality: Green LED Blinks:
10 second rate to indicate logging, 15 second
rate to indicate delay start mode Red LED Blinks:
10 second rate to indicate low battery and/or
full memory, 1 second rate to indicate
an alarm condition Password Protection:
An optional password may be programmed into the device to
restrict access to configuration options; data may be read out
without the password Engineering Units: Native measurement units can be scaled
to display measurement units of another type Battery Type: 3.6V lithium battery
included; user replaceable Battery Life: 10 months typical at a 1 minute reading rate Time Accuracy: ±1 minute/month
[at 20ºC (68ºF), stand alone data logging] Computer Interface: USB (interface cable required);
115,200 baud Software: XP SP3/Vista/Windows® 7 Operating Environment:
-10 to 60ºC (14 to 140ºF), 0 to 100% RH non-condensing IP Rating: IP65 Dimensions: Data Logger: 36 H x 64 W x 16 mm D (1.4 x 2.5 x 0.6") Probe: 111 L x 58 W x 0.76 mm thick (4.4 x 2.3 x 0.03") Cable Length: 5 m (16') Water Box: 74 H x 148 W x 39 mm D (2.9 x 5.8 x 1.5") Weight (OM-CP-LF101A-KIT): 226 g (8 oz) Materials: Data Logger: ABS plastic Waterbox: Black Anodized Aluminum
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with 3.6V lithium battery. Operator’s manual and USB interface cable are included with the OM-CP-IFC200 software/cable package (required for data logger operation, sold separately). Ordering Example: (1) OM-CP-LF101A-KIT Leaf wetness data logger, weatherproof enclosure and leaf wetness sensor, $399.00
