The OM-CP-MOTOR101A Series
measures and records on and off
status changes for motors or other
equipment drawing up to 200 Amps.
The state change occurs when the
current switch exceeds the 150 mA
set point. This allows for most basic
equipment to be monitored. The
current switch monitors whether
there is current passing through a
wire around which it is attached.
When the current exceeds 150 mA,
the output changes and provides a
voltage for the OM-CP-MOTOR101A
to measure. The device can hold up
to 406,323 state changes, but
memory will only be used if the
status has changed. The device can
be programmed to check for status
changes 4 times per second up to
once every 24 hours.
Data retrieval is simple. Simply plug
it into an available USB port and our
user-friendly software does the rest.
The software converts a PC into a
real-time strip chart recorder. Data
can be printed in graphical and
tabular format or exported to a text
or Microsoft Excel® file. The storage
medium is non-volatile solid state
memory, providing maximum data
security even if the battery becomes
discharged.
Specifications
Amperage Range: 0.15 to 200 A Trip Point: 0.15A (150 mA) fixed (200 mA AC for 50 Hz
operation) Status Output (Max): N.O. 1.0 A @ 30 Vac/Vdc Housing: Split core Reading Rate: 4 Hz to 1 every 24 hr Memory: 406,323 readings;
software configurable memory wrap Wrap Around: Yes Start Modes: Immediate start, delay start up to 18 months,
multiple pushbutton start/stop Multiple Start/Stop Mode: Start and stop the device multiple times
without having to download data or communicate with a PC Multiple Start/Stop Mode Activation:
To Start the Device:Press and hold the pushbutton
for 5 seconds, the green LED will flash during this time; the device
has started logging To Stop the Device:Press and hold the pushbutton
for 5 seconds, the red LED will flash for three seconds and then
the green LED will flashfor two
seconds; the device has stopped logging Real Time Recording: The device may be used with PC to monitor
and record data in real-time LED Functionality:
Green LED Blinks: 10 second
rate to indicate logging, 15 second rate to indicate delay start mode Red LED Blinks: 10 second
rate to indicate low battery and/or full memory Password Protection: An optional password may be
programmed into the device to restrict access to configuration
options; data may be read out without the password Engineering Units: Native measurement units can be scaled
to display measurement units of another type such as on/off,
open/closed and more Battery Type: 3.6V lithium battery
included; user replaceable Battery Life: 10 years typical,
dependent upon frequency and duty cycle Time Accuracy: ±1 minute/month
(at 20ºC/68ºF, stand alone data logging) Computer Interface: USB (interface cable required);
115,200 baud Software: XP SP3/Vista/Windows® 7 Operating Environment: -15 to 40ºC (5 to 104ºF),
10 to 90% RH non-condensing Dimensions (Data Logger):
36 x 56 x 16 mm (1.4 x 2.2 x 0.6") Current Switch:
54 x 89 x 26 mm (2.1 x 3.5 x 1.0") Weight: 113 g (4 oz) With OM-CP-IFC200: 255 g (9 oz) Materials: ABS plastic
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with 3.6 V lithium battery and operator’s manual. OM-CP-MOTOR101A-KIT includes OM-CP-IFC200 Windows software and USB interface cable. Ordering Example: (1) OM-CP-MOTOR101A-KIT Machinery on/off status data logging system, includes data logger, current switch and OM-CP-IFC200 Windows software and USB interface cable, $249.00
