Dual Voltage SCR DC Motor Speed Control For Up To 2 H.P. Motors |
| OMDC-250 Series Variable Speed DC Control |
|
 |
|
|
|
|
|
$
299.00
OMDC-253G-200E
|
| • |
Dual Voltage - 120/240 Vac
|
| • |
Adjustable Horsepower Settings
|
| • |
NEMA 4/12 or 4X (IP66) Enclosure
|
| • |
Packaged Bridge Supply (Full Wave)
|
| • |
1% Speed Regulation
|
| • |
Adjustable Minimum and Maximum Speeds
|
| • |
Adjustable Acceleration
|
| • |
Adjustable Current Limit to 15 A
|
| • |
50:1 Speed Range
|
View related products - Drives & Motors
|
| |
|
|
|
 |
 |
OMDC-253G-200E used for speed control in Omega's wire processing.
|
The OMDC-250 Series variable speed DC control offers
superb flexibility, reliability, and value. A general purpose,
economical control that is rated and tested to 2 horsepower,
it provides the ultimate in standard features and versatility.
ADDITIONAL FEATURES
Adjustable IR compensation
Line voltage compensation
5 kΩ speed potentiometer
150% overload capacity
Transient voltage protection
Inhibit circuit permits start and stop without breaking AC lines
Shunt field supply provided
SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: ±10% rated line voltage
Input Frequency: 50/60 Hz
Dimensions: 97 W x 140 H x 89 mm D (3.8 x 5.5 x 3.5")
Weight: 284 g (10 oz)
NOTE:
When using the -29 option (FWD-OFF-REV switch), care must be
taken to stop the motor completely before switching direction.
Damage to the drive can result from switching direction at speed.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with operator’s manual.
Ordering Example: (1) OMDC-253G-200E Dual voltage variable speed DC controller in NEMA 4/12 enclosure, $299
(1) OMDC-253G-200E-4X-7 Dual voltage variable speed DC controller with 4-20 mA isolated signal follower in a NEMA 4X enclosure, $450
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
