Digital Tachometer |
| OMDC-DM8000 |
|
 |
|
|
|
|
|
$
335.00
OMDC-DM8000
|
| • |
Four Devices in One: Tachometer, Counter, Totalizer, and Zero Speed Switch
|
| • |
Selectable Alarm Relay Output
|
| • |
Control Modes are Selectable Between Rate, Time, and Counter
|
| • |
User Inputs Allow for Special Functions: Counter Reset, Counter Gate, and Alarm Display
|
| • |
Sensor Input Voltage Range: 5 VDC to 24 VDC
|
| • |
5 VDC (50 mA) Sensor Power Supply Provided
|
| • |
Non-Volatile Memory for Storage of Custom Settings
|
| • |
Universal AC Input Voltage from 85 to 265 Vac
|
| • |
NEMA 4X Rating
|
View related products - Drives & Motors
|
| |
|
|
|
 |
The OMDC-DM8000 is an economical
microprocessor-based digital tachometer
system capable of measuring shaft speeds
lower than 1 RPM. With an on-board
microcomputer coupled with sophisticated
internal software and a quartz crystal
controlled reference frequency, the
OMDC-DM8000 is able to maintain accuracy
of ±0.04%, even if the shaft is uneven. The
OMDC-DM8000 is field programmable
through the easy-to-use frontpanel interface
and can be configured to display any desired
unit of measure. Large 13 mm (½") 4-digit
LED display numbers allow viewing under
the most adverse conditions.
The isolated 5 amp form C relay output can
be configured for many different alarming
conditions. Designed to use a variety of
inputs, including the hall-effect solid state
OMDC-PU-E Series pick-up, the system
delivers trouble free operation at an
economical cost. The OMDC-DM8000 offers
the same enhanced display options and
capabilities featured in our other digital
control products, as well as the universal
power supply and rugged european-style
terminal strip.
The OMDC-DM8000 can be used in process
applications for monitoring speeds and
rates, or counting discrete input signals.
Process applications using counting may be
batching, filling, mixing, punching, cutting,
drilling, diverting, or alarming. While
process applications using speed or rate
monitoring may be conveyors, conveyor
ovens, material flow, rotational rpm,
and testing.
SPECIFICATIONS
ELECTRICAL
Line Input
Voltage: Any voltage from 85 to 265 Vac
Frequency: Any freq from 48 to 62 Hz
Signal Input Frequency Range: 0 to 100,000 pulses per minute (higher frequencies are possible when using internal frequency divisor)
Resolution: From 0.01 RPM
Accuracy: ±0.04% display update every pulse or 0.5 seconds, whichever is longer Isolated High/Low Alarm Output: 5 A, 230 Vac
Settable Alarm Range: 0 to 9999
Transducer Signal Input: 0 to 5 to 0 to 24 Vdc
Display Range: 0.001 to 99,990
Units of Operation: User programmable, any unit sensor/pickup
Power Supply: 5V @ 50 mA Isolated Alarm Relay Output Ratings: 240 Vac @ 5A MECHANICAL
Display Type: LED, red, 4 digit, 13 mm (½") H Housing Type (With Supplied Gasket in
NEMA 4X Panel): NEMA 4X Connector Style (Pluggable Connector
Optional): 12-position 5 mm european-style Terminal Block Torque Setting: 4.4 in-lb max or 0.5 N-M
Faceplate Material: Polycarbonate with polycarbonate overlay
Housing Material: Aluminum
Dimensions:
Length (Panel Depth): 117.5 mm (4.6")
Width: 115.3 mm (4.5")
Weight: 382 g (13.5 oz) ENVIRONMENTAL
Operating Temperature Range: -10 to 45ºC (15 to 115ºF)
Operating Humidity Range: 95%, non-condensing
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with operator's manual.
Ordering Example: (1) omdc-dm8000 Digital tachometer with alarm relay output, $335.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
|
 |
OMDC-PU-E Series:
|
|
AC or DC Motor Speed Sensors from 1- 20 pulses per revolution to monitor speed and direction.
|
|
|
|
|
|
|
|
 |
|
|
