The D7D Monolithic Series indicating lights provide a cost effective
range for 22.5 mm signal control devices. Constructed from high
quality industrial grade thermoplastic, these pilot lights feature a
unique one piece body that incorporates both the front and rear
panel components and the bulb into one element for quick
assembly and ease of ordering.
These indicating lights are corrosion
and UV resistant and meet the
requirements for NEMA Type 4/4x/13 and IP65/66 sealing. These
incorporate a low mounting profile and have an optically enhanced
lens. The integrated LED bulbs have superior shock and vibration
ratings, a life rating of up to 100,000 hours and leakage current
protection up to 3 mA. LED bulbs are available in 24 Vac/dc,
120 and 240 Vac. The incandescent bulbs are front replaceable and
are available in 6, 12, 24, 48 and 120 volts.
D7D-P0N3, D7D-P0N2, D7D-P0N5, D7D-P3N2, D7D-P3N3, D7D-P3N5,
D7D-P4N2, D7D-P4N3, D7D-P4N5, D7D-P5N2, D7D-P5N3, D7D-P5N5
† All dollar amounts on this site are shown in US currency. Ordering Example: (1) OMPBD7D-P3N5 Green pilot light with integrated 120 Vac LED bulb, $28.00
Part Number Builder
Build Your Part Number Below
Bulb Color select from: 0 for Amber 3 for Green 4 for Red 5 for Yellow 6 for Blue 7 for Clear
Bulb Style select from: N for LED D for Incandescent
Power Module-Not all combinations available select from: 2 for 12V - Available in Incadescent Bulbs only 3 for 24V 4 for 48V - Available in Incadescent Bulbs only 5 for 120V 7 for 240V
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.