General Purpose AC Motors, 56C Flange, Single Phase, Fractional and Integral HP |
| OMT Series |
|
 |
|
|
|
|
|
$
97.00
OMT13-18-56CB
|
| • |
Rolled Steel AC Motors: 0.33 to 2 HP
|
| • |
NEMA 56C Frame
|
| • |
NEMA design B
|
| • |
115/208 to 230 Volt
|
| • |
TEFC (Totally Enclosed Fan Cooled)
|
| • |
Single-Phase
|
| • |
Class F Insulation
|
| • |
Premium-Grade Quality
|
| • |
1.15 Service Factor
|
| • |
Electrically Reversible
|
| • |
Heavy gauge bolt-on, bolt-off NEMA 56-frame removable base
|
| • |
Motor slide base for adjustable mounting
|
| • |
Replacement start/run capacitors available
|
| • |
2-Year Warranty
|
View related products - Drives & Motors
|
| |
|
|
|
 |
Omegamation™ general purpose AC motors
are made by one of the leading motor
manufacturers for over 45 years, a world-class
accredited supplier with a long history
of quality testing procedures and standards
performed by the finest independent testing
laboratories in the world. Our motors are made in high quality ISO9001-certified
facilities using only the highest quality
material and manufacturing processes.
All motors are electrically tested in subassembly
production and again after final
assembly, and come with an ironclad 2-year warranty.
Learn more about AC motors and drives:
Introduction to AC Motors and Drives
Features and Benefits of AC Motors from Omegamation™
Following are a few of the many reasons
why our AC motors provide the best combination
of quality and performance at the lowest prices.
BEARINGS There are no sleeve bearings in our entire
line of general purpose motors. We use nothing but heavy-duty oversized
ball bearings on both the DE (drive end) and the ODE (opposite drive end).
It is exactly for this reason that we can mount our motors in the "shaft up" or
"shaft down" position with no derating. A shaft slinger keeps moisture and
contaminants from the drive end bearing. And all of our AC motors have a
high tensile strength steel shaft.
WINDINGS / INSULATION All of our motors have copper
windings and are manufactured with Class F insulation.
END BELLS AND FAN COVERS All our end bells are heavy
duty burnished (polished) aluminum. Our fan covers are steel, not plastic.
JUNCTION BOXES Our large, easy-to-wire junction boxes
have rubber dust curtains designed to keep foreign particles from entry. These
covers are designed to come apart at an angle to permit ease of wiring. Most
motors are convertible F1 to F2 and all are rotatable at 90 degree intervals.
Conduit holes are provided per NPT standards.
MOTOR LEADS All of our leads are both color coded and
numbered per NEMA MG1 Standards.
CAPACITOR COVERS Each motor comes equipped
with a large steel capacitor cover with a protective rubber gasket and
oversized capacitors. The oversized start capacitor gives the motor
a much higher starting torque and voltage range.
NAMEPLATES Nameplates are said to be the
"Window Of Quality" of a motor. Our AC motor nameplates are stainless steel
to reduce corrosion and laser etched to provide permanent markings, and
include an easy-to-read wiring diagram.
PAINT We use an electrostatically applied, rust proof and
scratch resistant paint. The paint almost seems to become part of the
steel enclosure itself.
CERTIFICATION Our motors are CCSAUS Certified.
Note the US stamp. It means that our motor has not only passed the Canadian
Standard Association requirements, but also the USA's UL and ANSI standards,
thus giving them the highest certification standards you can have for
North America. Our certifications also include CE and of course ISO9001.
WARRANTY Our warranty matches the motors quality in that it
leads the industry in guaranteeing customer satisfaction. All of our AC motors have
an ironclad two-year warranty and it is a nameplate-only warranty. That is to say,
the customer sends us the nameplate and we send him a new motor. No paperwork
- no delay - no waiting for credit based on a factory inspection - and no questions
asked! Simply call our customer service department to obtain an AR
number for the nameplate return.
|
| |
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) OMT13-18-56CB 56C flange rolled steel motor, 115/208 to 230 V single-phase, 1/3 HP, 1800 RPM, $97
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
OMAT Series:
|
|
General Purpose AC Motors, 56C Frame, Three-Phase, Fractional and Integral HP
|
|
|
|
 |
OME Series:
|
|
General Purpose AC Motors, Industrial Duty Three-Phase
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Keywords.:General Purpose AC Motors, 56C Flange, Single Phase, Fractional and Integral HP, Inverter Duty, Rolled Steel, Class F Insulation, Industrial Duty, AC Motor
|
Back to top
|
|
