Tolerances The diameter and "out of roundness" of OMEGA's insulators is plus or minus 5% or ±0.015", whichever is greater. The straightness is at least 1/32 inch for each six-inch length. The following table lists the maximum recommended wire diameters which should be used with six-inch sections. Closer tolerances are permissible with shorter sections, but the minimum clearance tolerance is ±5% or 0.015 inch, whichever is greater.
OMEGATITE® 450 This is an impervious, recrystallized, pure alumina ceramic containing over 99.8% Al2O3. It has the most superior gas and vacuum tightness and electrical insulating properties at elevated temperatures. It is non-reactive and recommended for use with platinum, as well as tungsten and molybdenum thermocouple alloys. The maximum service temperature is 1900°C (3450°F).
OMEGATITE® 350 This is an impervious, recrystallized pure alumina ceramic containing over 99% Al2O3. It has superior gas and vacuum tightness and electrical insulating properties at elevated temperatures. It is non-reactive and compatible with tungsten and molybdenum thermocouple alloys. The maximum service temperature is 1900°C (3450°F).
OMEGATITE® 200 This material is recommended for most thermocouple applications. It consists of a mullite type ceramic capable of withstanding temperatures up to 1650°C (3000°F).
† All dollar amounts on this site are shown in US currency.
Note: All stock insulators are six inches in length. Other sizes, styles and lengths by quotation.
Part Number Builder
Option Descriptions
(1)
Model Code(see part number tables above)
Select ORX for OMEGATITE® 450 / Single Hole ORA for OMEGATITE® 350 / Single Hole ORM for OMEGATITE® 200 / Single Hole TRX for OMEGATITE® 450 / 2 Hole TRA for OMEGATITE® 350 / 2 Hole TRM for OMEGATITE® 200 / 2 Hole FRX for OMEGATITE® 450 / 4 Hole FRA for OMEGATITE® 350 / 4 Hole FRM for OMEGATITE® 200 / 4 Hole
(2)
Dimension
Select 1814 for Inside Dia. 1/8in. Outside Dia. 1/4in. 33214 for Inside Dia. 3/32in. Outside Dia. 1/4in. 11614 for Inside Dia. 1/16in. Outside Dia. 1/4in. 332316 for Inside Dia. 3/32in. Outside Dia. 3/16in. 116316 for Inside Dia. 1/16in. Outside Dia. 3/16in. 11618 for Inside Dia. 1/16in. Outside Dia. 1/8in. 132116 for Inside Dia. 1/32in. Outside Dia. 1/16in. 020132 for Inside Dia. 0.02in. Outside Dia. 1/32in. 56414 for Inside Dia. 5/64in. Outside Dia. 1/4in. 04018 for Inside Dia. 0.04in. Outside Dia. 1/8in. 13218 for Inside Dia. 1/32in. Outside Dia. 1/8in. 02018 for Inside Dia. 0.02in. Outside Dia. 1/8in. 164116 for Inside Dia. 1/64in. Outside Dia. 1/16in. 010364 for Inside Dia. 0.01in. Outside Dia. 3/64in. 005132 for Inside Dia. 0.005in. Outside Dia. 1/32in. 364316 for Inside Dia. 3/64in. Outside Dia. 3/16in. 132316 for Inside Dia. 1/32in. Outside Dia. 3/16in.
(3)
Length
Select 6 for 6 inches 5PK 12 for 12 inches 5PK 18 for 18 inches 24 for 24 inches 36 for 36 inches
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.