OMEGATHERM® thermal conducting paste is a high
temperature and high thermally conductive paste product.
They are specially formulated for permanent and temporary
bonding of thermocouples, thin film RTDs, thermistors and
other temperature sensors, to most surfaces–metals,
ceramics, glass, plastics, paper products.
OMEGATHERM® products is compounded and packaged
for convenient, easy mixing and application. Each
formulation exhibits important characteristics necessary for
accurate, fast, reliable temperature measurement. These
are: good adhesion and strength, high temperature rating,
high thermal conduction, high electric insulation, thixotropic
consistency, fast cure, and easy application.
OMEGATHERM® 201
OMEGATHERM® 201 — is a very high thermally conductive
filled silicone paste, ideally suited for many temperature
measurement applications. This thick, grey, smooth paste
wets most surfaces and will not harden on long exposure to
elevated temperatures. It is rated for continuous use
between -40 and 200°C (–40 and 392°F).
OMEGATHERM® 201 provides an excellent means of
conducting heat and expanding the heat-path area from a
surface to a temperature measurement sensor, thus
increasing the speed of response and improving accuracy.
Some applications are:
a) Surface Measurement Probes — dab a small amount
on the surface and push the sensor into this area.
b) Temporary bonding and encapsulating of
temperature sensors — simply dab OMEGATHERM®
201 onto the surface or in the cavity, plant the sensor
in the paste, and tape to hold in place.
This highly versatile paste is supplied in 1/2- and 2-ounce
jars, as well as in one- and two-pound containers.
