The OMEGA ® PCL-2A benchtop/panel mount system introduces a new era in pressure calibration standards. This unique instrument measures pressure, flow, vacuum, leak, current, voltage and change-of-state for switch testing. A fully equipped PCL-2A system provides all calibration capabilities needed in virtually all pressure measurement and test applications. Each system consists of a base unit and one or more plug-in pressure modules. An array of pressure modules is available to cover ranges from 0.25 inches H 2 O through 7500 psi. Modules can be interchanged quickly and easily without the use of tools. Select any combination of modules to meet your application needs. The PCL-2A pressure calibration and test system combines the capabilities of plug-in pressure modules with a wide selection of standard firmware features. This combination of firmware-related features and unlimited pressure sensor interchangeability make the PCL-2A one of the most powerful pressure calibration and test instruments available today.
SPECIFICATIONS Available Accuracies (% of span compared to standard): ±0.07% of span (ranges below 1 in H 2 O) ±0.06% of span (from 0/1 through 0/200 in H2 O)±0.05% of span (psi ranges only) Repeatability: * ranges 0/5 psi and above ±0.02% of span (typical) ranges 0/2 psi and below ±0.05% of span Sensitivity: * + 0.002% of span with damping 1 part in 50,000 (max)( * included in accuracy specifications) Operating Temp. Range: 0 to 49°C (32 to 120°F) Compensated Temp. Range: -7 to 49°C (20 to 120°F) Reference Temperature: 21°C ±1.7°C (70° ±3°F) Temperature Error: maximum of ±0.007% of span per over the compensated range for zero and span Storage Limits: -20 to 70°C (-4 to 158°F) Display: Alphanumeric LCD, 9.4 mm (0.37") height per 2 lines, 16 characters/line Display Update: 100 ms Process Connection: 1 /8 NPT, internal thread Electrical Connection: Miniature recessed banana jacks Housing: Molded, high-impact ABS case, gray Weight: Base unit: 1.3 kg (2.2 lb) Pressure Module: 0.3kg (0.5lb) each Dimensions: 200 L x 108 W x 83 mm H (7.88 L x 4.24 W x 3.25" H) nominal Power Supply: Internal: 9 Vdc batteries (2 required) included External: ac adaptor 9 Vdc, 500 mA Portable Operation: 30 hours on two 9 Vdc alkaline batteries
† All dollar amounts on this site are shown in US currency.
Note: The above ordering table contains only a partial list of plug in modules available. For a complete listing please refer to the "Related Links" below. Ordering Example: (1) PCL-2A benchtop/panel mount pressure calibrator base unit with alarms and datalogging capability , $2,430.00, plus (1) PCL-MB-015G 0-15 psig plug in pressure module , $1,110.00, plus (1) PCL-MB-500G 0-500 psig plug in pressure module , $1,265.00, $2,430.00 + 1,110.00 + 1,265.00 = $4,805.00
Keywords:Benchtop Pressure Standards with Interchangeable Range Modules