Loop Calibrator, Precision |
| PCL120 |
|
 |
|
|
Precision Loop Calibrator Very High Accuracy
 |
| Click for larger image. |
|
|
$
595.00
PCL120
|
| • |
Very High Accuracy: ±0.015% of Reading
|
| • |
Very High Resolution: 0.001 mA
|
| • |
Auto Step and Ramp Function
|
| • |
% Error Function— Eliminates Manual Error Calculation
|
| • |
Extended Adjustment Range—Digital Knob and User-Selectable Decade Output Allow Large and Incremental (0.001 mA Step) Output Changes
|
| • |
Reads 0 to 28 Vdc
|
| • |
Built-In 250 Ohm Resistor Facilitates Calibration of Hart™ Devices
|
| • |
Remote Calibration Through Automatic Step and Ramp Functions
|
| • |
Loop Power Measurement Capability
|
| • |
Simulates, Powers, and Measures 2-Wire Transmitters
|
| • |
5 Preset Outputs (4, 8, 12, 16, 20 mA)
|
| • |
Fuseless Input Protection Up to 250 Vac
|
View related products - Instrumentation for Pressure and Strain Measurements
|
| |
|
|
|
 |
With an accuracy of 0.015% of
reading, 0.001 mA resolution,
and 1 microamp step resolution, the PCL120 has the highest
precision in its class. Other features
that make the PCL120 stand out
include a "% error" function, which
eliminates manual error calculation
and allows the display of actual
versus ideal error at any calibration
point. The PCL120 can simulate,
power, and measure 2-wire
transmitters. Its automatic step and
ramp functions enable remote
calibration of 4 to 20 mA devices.
The PCL120 has many
innovative, powerful features that
make calibration easy. A few
clearly marked keys give the
user access
to the full functionality of the unit.
The STEP and RAMP output
modes automate either a
discrete 4-8-12-16-20-16-12-8-4
mA
stair step output or 2 speeds of
a linear 4-20-4 mA ramp output.
Pressing the AUTO key (1)
activates this time-saving
function. To further aid remote
calibration, the PCL120
features a minimum/maximum
value recall function. In the
measure mode, holding the
AUTO(/MAX) key (1) gives a
direct readout of the maximum
value, while holding the 25%(/MIN)
key (4) gives a direct readout of the
minimum value. Holding the
% ERROR key (2) while turning the
large knob provides instant
feedback on the difference between
the ideal and actual current values
required for a given device
response. This tells the user
whether the device is within its
accuracy range. No further
calculations are necessary. A LOOP
POWER key (3) provides instant
24 Vdc loop power output. The 25%
(4) key provides instant outputs of
4, 8, 12, 16, and 20 mA loop
current, with increments occurring
each time the key is pushed.
SPECIFICATIONS
(25°C Unless Otherwise Noted)
Input
Current Range: 0 to 24 mA; -25 to 125%
Voltage (Reading): 0 to 28 Vdc
Input Protection: Fuseless up to 250 Vac
Output
Source/Simulate Range: 0 to 24 mA; -25 to 125%
Drive Capability:
Without HartTM: 1200 O
With HartTM: 950 O
Loop Supply Voltage: 24 Vdc
Range Select: Decade; incremental in 0.001 mA steps
Resolution: 1 µA
Accuracy: ±0.015% of reading ±2 µA
Environmental
Operating Temperature: -10 to 55°C (14 to 131ºF)
Storage Temperature: -20 to 70°C (-4 to 158ºF)
Power Requirement: 9 Vdc
Battery: One 9 V (included)
AC Adaptor: Optional
Mechanical Dimensions (Without Boot): 144.7 H x 80 W x 3.63 mm D (5.7 x 3.15 x 1.43")
Weight: 340 g (12 oz)
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Comes with test leads, 9V battery, NIST-traceable certificate, flexible protective sleeve, and complete operator’s manual.
Ordering Example: (1) PCL120 Precision loop calibrator, $595.00
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
PCL1200:
|
|
Portable, High Accuracy Multifunction Calibrator
|
|
|
|
 |
PCL1000:
|
|
Multifunction Process Calibrator with RS232 Interface, High Accuracy
|
|
|
|
|
|
|
 |
|
|
