The PHE-6820 electrode and assembly
features a retractable design for insertion
into tanks and main lines. The assembly,
when used with a 1" full port or larger ball
valve (user supplied), allows the electrode
to be removed without shutting the system
down. This electrode can be mounted in
any location, even up through the bottom
of a tank with the electrode surface facing
upward. Its unique design affords mounting
in any direction and is suitable for most
systems' inherent design. (This style is
also available for ORP measurements.)
The flat surface design minimizes fouling
and coating and eliminates electrode
breakage. Turbulent flow across the
electrode surface results in a scrubbing
action that keeps the electrode clean.
The flat surface electrode is specifically
designed for difficult applications such as
oily waste water, emulsions, lime slurries,
and flocculants.
Mounting assemblies come with 3 m (10')
cable with BNC connector. Cable lengths
are available up to 15 m (50').
NOTE: At the time of initial purchase, please
order both electrode and mounting assembly.
Mounting assembly includes insertion
assembly and cable. If ordered with
automatic temperature compensation (ATC),
the temperature compensator is built into the
insertion assembly. When electrode has
expired, simply re-order electrode.
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with electrode care instruction sheet.
Temperature compensation not required with ORP electrodes.
Order electrode and mounting assembly separately. Materials of construction must be the same for both electrode and mounting assembly.
Mounting assemblies come with 3 m (10') cable with BNC connector.
For non-standard cable lengths up to 15 m (50') replace the suffix "-10" in the model number with the desired length in feet, add $2 per foot to price. (Additional cost of $2 per foot applies to the entire cable length.
