The PHE-7352-15 is a combination pH sensor designed for insertable use
in process and waste water applications where greater pipeline penetration
is required. The outer body material is PPS and has 3/4'' MNPT
(or optional 1" MNPT) front and rear facing threads with 21/4'' (57.1mm)
insertion depth. The sensor features sealed double junction construction
which is highly resistant to electrode poisoning solutions, (typically those
with cyanide, ammonia, sulfide and heavy metals in appreciable concentrations).
The use of the non-fouling patented Porous PTFE liquid junction ensures a
steady presence of reference electrolyte. Coupled with the novel Plunger pH
glass electrode design, this sensor assures a low long maintenance
service life in most applications. Use of the high temperature version is
recommended where service temperatures continuously exceed 80°C (176°F).
Application
• Suitable for Severe Conditions
• Large Diameter Pipe Insertion
• Waste Water Pipeline Insertion
† All dollar amounts on this site are shown in US currency.
Note: Comes complete with electrode care instruction sheet and 4.6 m (15 ft) of cable.
For non-standard cable lengths, replace the suffix "-15" in the model number with required length in feet, add $2 per foot to price. (Additional cost of applies to entire length of cable.)
For HF/Fluoride Resistant electrode, add suffix "-HF" to model number, add 50 to price.
For high temperature reference cell, add suffix "HT" to model number, add $35 to price.
For solution ground, add suffix "SG" to model number, add $45 to price.
Ordering Example: (1) PHE-7352-15 General purpose sensor, $150.00, plus (1) PHCN-37 pH Controller, $395.00, $150.00 + 395.00 = $545.00
