Industrial pH Two Wire 4-20 Ma Transmitters
Available LCD Display w/NEMA-4X Housing Model Available
|
| PHTX-11/PHTX-014/PHTX-212 |
|
 |
|
|
Industrial pH Two Wire 4-20 Ma Transmitters
 |
| Click for larger image. |
|
|
|
|
|
|
 |
The model PHTX-014 pH two wire transmitter is designed
to provide a standard 4 to 20 mA current output which is
proportional to the pH being measured. Its small size and
encapsulated construction allow for easy installation and
will accommodate any pH electrode with a BNC connector.
Temperature compensation is either manual or automatic
with use of any 1000 Ohm Platinum RTD. This is a popular choice
for use with recorders or any application where it is convenient to divide the output
into ten division. The PHTX-212 is
the same as the PHTX-014 but with a range of 2 to 12 pH.
The PHTX-11 features include a NEMA-4X housing,
an integral LCD display for continuous pH reading or for
a direct corresponding readout in milliamps, using a convenient
push-button switch. The 4 to 20 mA output signal may be
scaled in the field to meet specific pH ranges in any 1 to 14 pH
unit increment. Temperature compensation is manual using a
fixed resistor or automatic using any of OMEGA’s
OL-700 Series thermistors probes.
SPECIFICATIONS
Range: 0 to 14 pH or 2 to 12 pH
Span: PHTX-014, 0 to 14 pH; PHTX-012: 2 TO 12 pH; PHTX-ORP: 0 to 200 mV; PHTX-11 Any 1 to 14 pH unit, user selectable
Accuracy: PHTX-014, PHTX-012: ±0.02 pH
Operating Temperature: PHTX-014, PHTX-012, -25 to 70°C (-13 TO 158°F); PHTX-11 -10 to 60°C (14 to 140°F)
Display Resolution:PHTX-11 0.01 pH
Input Impedance: > 10^13 Ohms
Temperature Compensation: Manual: fixed resistors; Automatic: PHTX-014, PHTX-012, 1000 ½ Platinum RTD; PHTX-11 OMEGA’s OL-700 series thermistor probes
Connector: BNC
Power: 12 to 80 Vdc (24 Vdc recommended)
Output: PHTX-014, PHTX-012: Non-isolated 4 to 20 mA; PHTX-11 isolated 4 to 20 mA
Input to Output Isolation: PHTX-11, 600 V maximum
Dimensions: PHTX-014: 50.8 H x 38.1 W x 24.1 mm D (2 x 1.5 x 0.95"); PHTX-11: 125 H x 74.2 W x 99.6 mm D (4.92 x 2.92 x 3.92")
Display: PHTX-11: 3 1 /2 digit LCD
Please download PDF file below for full product specifications
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Units come complete with operator's manual.
Ordering Example: (1) PHTX-11 Isolated 4-20 mA transmitter, $430
|
|
|
|
|
| |
|
|
|
|
|
 |
 |
 |
|
|
Related Links -
Related Products
|
|
|
|
|
|
 |
|
|
|
Related Products
|
 |
OL-700 Series :
|
|
Linear Response Thermistor Probes with 10-foot Cable terminated in 3 stripped leads, Various Applications and Styles
|
|
|
|
|
|
 |
PHA-20:
|
|
Single-use Packages - pH buffer pouches
|
|
|
|
|
 |
Sensor Wire:
|
|
Sensor and Transducer Wire and Multi-Conductor Cable
|
|
|
|
 |
U24Y101:
|
|
Unregulated Power Supplies
|
|
|
|
|
|
|
 |
|
|
