Cart  |  Contact  |  Help  | 
1-888-826-6342  | 
US and Canada1-888-826-6342
International1-203-359-1660

Your One-Stop Source for Process Measurement & Control!

pH, ORP and Conductivity Controller and Transmitter

PHUCN601, PHUCN610, PHUTX601

PHUCN601, PHUCN610, PHUTX601:pH, ORP and Conductivity Controller and Transmitter

pH, ORP and Conductivity Controller and Transmitter

$970.00 PHUCN601

1 year warranty
  • For pH, ORP, Conductivity/Resistivity
  • 1/4 DIN, NEMA 4X, Polycarbonate Enclosure
  • User-Friendly Design with Interior LCD Menu
  • Easy to Read with Large, Bright LED Display
  • Quick and Easy to Calibrate
  • Reduces Chemical Consumption with Cycle Timed Relays on Controllers
  • Two Control Relays with Third Relay for High/Low Alarm on Controllers
View related products - Industrial pH Instrumentation and Electrodes

Description

The PHUCN600 Series multi-parameter controller is a microprocessor-based controller capable of measuring one of the following parameters, pH, ORP, or conductivity.
When shipped from the factory, the PHUCN600 Series is not set to measure any one parameter.When the PHUCN600 Series is powered up for the first time, it will display the meter selection screen where the meter type must be selected. This meter selection screen will only be displayed when the PHUCN600 Series is powered up for the first time.
After the user selects a meter type the PHUCN600 Series will remain set to that meter type until it is changed with the meter selection menu function in the Utilities menu.
To return the PHUCN600 Series to its factory settings, the user must re-select the current meter type from the meter selection menu function. This will override all set-points and return all settings back to the factory settings. The PHUCN600 Series User’s menu has been divided into five main categories:
  • Calibration, used to calibrate the PHUCN600 Series with the selected sensor
  • Utilities, used to manually control or override the outputs
  • Setup, used to configure the PHUCN600 Series many options
  • Diagnostics, used to troubleshoot any problems
  • Outputs, used to configure the PHUCN600 Series outputs.
There are two displays on the PHUCN600 Series. A bright LED numeric display with bar graph on the outside front panel, and a 2-line, 16-character LCD display on the inside. The LED readout on the outside panel can be seen several yards away. The distinctive, Color coded bar graph will immediately indicate if you are within the process parameters that you set (green), if the control relays are on (yellow) and if you are in alarm condition (red). This makes diagnosing pump and alarm malfunctions easy. All configuration and control functions are performed on the LCD menu on the inside front panel.
A universal mounting kit is included for surface, panel and pipemount applications. The 1/4" DIN enclosure makes panel-mount cutouts and engineering simple.
Complete and versatile the PHUTX600 is the 1/4 DIN two wire transmitter which can measure Conductivity, pH or ORP. PHUTX600 comes complete with a universal mounting kit for surface, panel and pipe-mount applications. The NEMA 4X 1/4 DIN enclosure is perfect for stand-alone or panel-mount operation.
PHUCN600 and PHUTX600 Series are packaged in a rugged NEMA 4X polycarbonate enclosure making it ideally suited for heavy-duty applications such as industrial wastewater neutralization, municipal water and wastewater, pulp and paper, and process control.

The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.

Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.

Star

Most Popular Models!

Part Number/Desc.
Availability
Price
Description
Qty
Controllers
Click to expand/minimize a list of what others bought with thePHUCN601
PHUCN601
Star
Availability:In Stock 
$970.00   
120 Vac pH/ORP conductivity
 
  
PHUCN610
Star
Availability:In Stock 
$970.00   
240 Vac pH/ORPconductivity
 
Transmitter
  
PHUTX601
Star
Availability:In Stock 
$540.00   
Transmitter pH/ORP conductivity
 
Electrodes with 1 1/2 NPT, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C (23 to 203 °F)
Click to expand/minimize a list of what others bought with thePHE-600
PHE-600
Star
Availability:In Stock 
$590.00   
1 1/2 NPT differential pH electrode, CPVC sensor body 180 mm (7.1") long 55 mm (2.14") diameter
 
  
ORE-600
Star
Availability:In Stock 
$590.00   
1 1/2 NPT differential ORP electrode, CPVC sensor body 180 mm (7.1") long 55 mm (2.14") diameter
 
Electrodes with 1 1/4" compression fitting for variable insertion, 4.6 m (15') 5 conductor shielded cable, -5 to 95°C Wetted materials: CPVC PVDF glass titanium palladiam alloy and EPDM (platinum for ORP probe) psig max: 6.9 bar (100 psig)
  
PHE-610
Star
Availability:In Stock 
$610.00   
Compression fitting pH electrode for 7/8" to 5" variable insertion, 229 mm (9") long, 28 mm (1.125") diameter
 
  
ORE-610
Star
Availability:In Stock 
$610.00   
Compression fitting ORP electrode for 7/8" to 5" variable insertion
 
  
PHE-620
Star
Availability:In Stock 
$655.00   
Hot tap pH electrode for extended lengths 7/8" to 6" variable insertion
 
  
ORE-620
Star
Availability:In Stock 
$655.00   
Hot tap ORP electrode for extended lengths 7/8" to 6" variable insertion
 
Conductivity cells with 3/4 MNPT CPVC compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials:Graphite, epoxy, EPDM,& CPVC Max. Press/Temp: 50 psi @60°C, 100 psi @ 50°C, 150 psi @ 20°C cable length: 6.10 m (20')
  
CDE-600-001
Star
Availability:In Stock 
$300.00   
0.01 cell constant 0 to 2 µS/cm3 and 0 to 19.99 MΩ/cm3 epoxy low temp cond probe
 
  
CDE-600-01
Star
Availability:In Stock 
$199.00   
0.1 cell constant 0 to 20 & 0 to 200 µS/cm3 epoxy low temp cond probe
 
  
CDE-600-1
Star
Availability:In Stock 
$199.00   
1 cell constant 0 to 2000 µS/cm3 epoxy low temp cond probe
 
  
CDE-600-10
Star
Availability:In Stock 
$199.00   
10 cell constant 0 to 20 mS/cm3 epoxy low temp cond probe
 
  
CDE-600-50
Star
Availability:In Stock 
$220.00   
50 constant 0 to 200 mS/cm3 epoxy low temp cond probe
 
Conductivity cells with 3/4 MNPT 316SS compression fitting, auto. temp. Compensation: 0 to 100°C (32 to 212°F). Wetted materials: Graphite, epoxy, polypropylene, & 316SS Max. Press/Temp: 250psi @ 120°C cable length: 6.10 m (20')
  
CDE-610-001
Star
Availability:In Stock 
$375.00   
0.01 cell constant 0 to 2 µS/cm3 & 0 to 19.99 MΩ/cm3 epoxy high temp cond probe
 
  
CDE-610-01
Star
Availability:In Stock 
$280.00   
0.1 cell constant 0 to 20 and 0 to 200 µS/cm3 epoxy high temp cond probe
 
  
CDE-610-1
Star
Availability:In Stock 
$280.00   
1 cell constant 0 to 2000 µS/cm3 epoxy high temp cond probe
 
  
CDE-610-10
Star
Availability:In Stock 
$280.00   
10 cell constant 0 to 20 mS/cm3 epoxy high temp cond probe
 
  
CDE-610-50
Star
Availability:In Stock 
$300.00   
50 cell constant 0 to 200 mS/cm3 epoxy high temp cond probe
 
Conductivity Accessories
  
CDE-600-C-* (LENGTH)
Star
Availability: 
Consult Sales  
3.00/foot Interconnect cable for CDE-600/610 Series
 
 
Required for Use of pH and ORE Sensors
  
PHE-600-SB
Star
Availability:In Stock 
$92.00   
† Salt Bridge kit kit with PVDF outer junction (3 pack) for required for use with PHE/ORE-600 Series sensors
 
  
PHE-612-SB
Star
Availability:In Stock 
$92.00   
† Salt Bridge kit with PVDF outer junction (3 pack) for PHE/ORE-610/620 Series sensors
 
pH Accessories
  
PHE-600-C-(*)
Star
Availability: 
Consult Sales  
$2.00/foot Interconnect cable for PHE/ORE-600 Series
 
 
  
PHE-600-EP
Star
Availability:In Stock 
$51.00   
Electrode protector
 
  
PHE-600-JB
Star
Availability:In Stock 
$67.00   
Junction box with integrated terminal strip.
 
  
PHE-610-EP
Star
Availability:In Stock 
$51.00   
Electrode protector for PHE/ORE-610/620
 
  
PHE-620-BVA
Star
Availability:4 weeks 
$285.00   
PVC hot tap ball valve assembly
 
  
PHA-10
Star
Availability:In Stock 
$10.00   
pH 10 buffer solution 500 ml (1 pt)
 
Click to expand/minimize a list of what others bought with thePHA-10-GAL
PHA-10-GAL
Star
Availability:In Stock 
$26.00   
pH 10 buffer solution 4L (1 gal)
 
  
PHA-4
Star
Availability:In Stock 
$10.00   
pH 4 buffer solution 500 ml (1 pt)
 
Click to expand/minimize a list of what others bought with thePHA-4-GAL
PHA-4-GAL
Star
Availability:In Stock 
$26.00   
pH 4 buffer solution 4 L (1 gal)
 
  
PHA-7
Star
Availability:In Stock 
$10.00   
pH 7 buffer solution 500 ml (1 pt)
 
Click to expand/minimize a list of what others bought with thePHA-7-GAL
PHA-7-GAL
Star
Availability:In Stock 
$26.00   
pH 7 buffer solution 4 L (1 gal)
 
  
PHA-DI
Star
Availability:In Stock 
$10.00   
De-ionized water 500 ml (1 pt)
 
Click to expand/minimize a list of what others bought with thePHA-DI-GAL
PHA-DI-GAL
Star
Availability:In Stock 
$26.00   
De-ionized water 4 L (1 gal)
 
  
PHAB-DI
Star
Availability:In Stock 
$30.00   
20 single use foil packets of de-ionized water
 
Click to expand/minimize a list of what others bought with thePHAB-PH
PHAB-PH
Star
Availability:In Stock 
$30.00   
5 each single use foil packets of pH-4, pH-7, pH-10, and de-ionized water
 
All amounts shown in USD
Note: Comes complete with operators manual.

* Insert cable length in feet.

†The PHE-600-SB Salt Bridge kit required for use of the pH and ORE sensors is sold separately. pH and ORE sensors can not be used without the Salt Bridge kit.


Ordering Example: (1) PHE-600 pH Electrode, $590.00  plus (1) PHUTX601 Transmitter, $540.00, $590.00 + 540.00 = $1,130.00
Related Links
Product Manuals:
Download PHUCN600 - Multi-Parameter Controller & Analyzer (NOTE: 40MB)
Download PHUTX601 - Multi-Parameter Transmitter (NOTE: 21MB)
Download PHE--600/610, ORE-600/610 - Differential pH and ORP Probes
Download CDE-600/610 - Conductivity Cells