Terminal Block RTD (PT100) Probe |
| PR-15 |
|
 |
|
|
|
|
|
$
79.00
PR-15-2-100-1/4-6-E
|
| • |
100 Ohm Class B DIN Platinum (alpha = .00385 ohm/ohm/C) Element Standard, Optional American Curve (alpha = .00392 ohm/ohm/C) Available
|
| • |
Three Wire Configuration Standard, Uncolored Screw Terminals Connected to Same Side of RTD Element. Two and Four Wire Configurations Available
|
| • |
1/4 or 1/8 Inch Diameters Standard
|
| • |
6, 9, 12, 18, and 24 inch Probe Lengths Standard, Special Lengths Available
|
| • |
Probe Can Be PFA Coated for Improved Corrosion Resistance
|
View related products - RTD (PT100) Probes, Elements and Assemblies
|
| |
|
|
|
 |
The large terminal block termination of the PR-15 is fitted with large pan head screw for easy termination. Capable of direct immersion up to the block, the PR-15 can easily be mounted into fixtures, pipes and other ducts by using OMEGALOK® compression fittings, sold separately.
Custom diameters and configurations are available; contact the Sales Department.
Pricing for several popular models is shown in the ordering table below. Use the Part Number Builder to obtain pricing for other models.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Other lengths readily available. Lead Type 2 is a 3-wire configuration.
Ordering Example: (1) PR-15-2-100-1/4-24-E RTD terminal block probe, 3-wire configuration, 100 ohm, 1/4" diameter, 24" length, European curve (alpha = 0.00385), $86.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Probe Diameter
|
| |
Select
1/8 for 1/8 inch
1/4 for 1/4 inch
|
(2)
|
Sheath Length
|
| |
Select
6 for 6 inch
9 for 9 inch
12 for 12 inch
18 for 18 inch
24 for inch
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
 |
|
|
|
Related Links -
Related Products
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
