PT100 RTD Probe with Quick Disconnect Miniature Connector |
| PR-17 |
|
 |
|
|
PT100 RTD Probe with Quick Disconnect Miniature Connector
 |
| Click for larger image. |
|
|
$
99.00
PR-17-2-100-1/8-6-E
|
| |
Sensor Contains a Precision 100 Ohm Class A DIN Platinum Element Standard (alpha = .00385 ohm/ohm/ºC)
|
| |
Temperature Range: -200 to 500ºC (Connector 220ºC Max)
|
| |
3-Wire Configuration Standard
|
| |
Provided With Integral Omega MTP Style 3-Pin Miniature Connector Plug (Flat Pins) With Mating Connector (Note: Single Lead Marked With a Red Dot on the Connector)
|
| |
Standard Probe Diameters Include 1/8", 1/16", 3mm and 1.5mm .
|
| |
Standard Probe Lengths Include 6", 9", 12", 18", 24", 150mm, 225m, 300mm, 450mm and 600mm.
|
| |
Optional PFA Coating Available.
|
View related products - RTD (PT100) Probes, Elements and Assemblies
|
| |
|
|
|
 |
This RTD probe assembly has a miniature 3-prong Omega "MTP" style connector for easy installation to extension cables, hand held meters or other instrumentation. The sheath can be simply placed into a container, or installed into place using an optional "BRLK" or "SSLK" compression fitting. The precision 100 ohm Class A DIN platinum element contained in the sensor will provide years of accurate and dependable service.
|
| |
 |
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: Standard: Specify 1/8 or 1/16 for probe diameter in inches. Add $1.00 per inch for lengths 25 to 72". Add $7.00 per foot for lengths above 72" (1/16" dia. 24" max.). Metric: Specify “M15” for 1.5 mm or “M30” for 3 mm probe dimensions. Add $1.00 per 25 mm for lengths 625 mm to 1800mm. Add $7.00 per 300 mm for lengths above 1800mm.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
Ordering Example: (1) PR-17-2-100-1/8-12-E Quick disconnect type PR-17 probe with miniature mating connector, style 2 wiring (3 lead configuration), 100 ohm Class A DIN platinum element, 1 / 8 " diameter, 12" long, European curve (alpha = 0.0385), $99.00
|
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
Part Number Builder |
 |
 |
 |
 |
 |
 |
|
|
|
Option Descriptions
|
|
(1)
|
Probe Diameter
|
| |
Select 1/16 for 1/16 inch 1/8 for 1/8 inch
|
(2)
|
Sheath Length
|
| |
Select 6 for 6 inch 12 for 12 inch 18 for 18 inch 24 for 24 inch CUSTOM for custom length in inches from 2 up to 24 for 1/16th inch and 72 for 1/8th inch(whole numbers only)
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
 |
|
|
 |
|  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Related Links -
Related Products
|
 |
 |
 |
 |
 |
 |
|
 |
 |
|
|