The Sub Miniature Connection Head Provided on the PR-19 Comes With a Terminal Board for Wiring The Probe to Your Instrumentation. Due to Its Small Size, Please Note That It Cannot Accommodate a Transmitter.
This rugged design offers a variety of protection heads with 1/2" NPT mounting threads and 304 SS sheath. The length dimension includes a 1/2" thread allowance for use with thermowells or for direct immersion into the process. All probes include a screw terminal block for easy connection of copper extension wire. Intermediate probe lengths are available. Use the next longest probe’s price. Lengths over 24" are also available; contact Sales Department for availability and pricing.
For replacement probes, model without head, enter the part-number followed by "-RP" in the "Order by Part Number" below the Ordering box
Order By Part Number
† All dollar amounts on this site are shown in US currency. Note: Lengths over 24" are also available; contact Sales for Availability and Pricing. Ordering Example: (1) PR-19-2-100-1/4-12-E Industrial RTD probe with sub-miniature aluminum head, 3-wire configuration, 100 ohm, 1/4" diameter, 12" length, european curve (a = 0.0385), $99.00
Part Number Builder
Build Your Part Number Below
Probe Diameter select from: 1/8 for 1/8 inch 1/4 for 1/4 inch 3/16 for 3/16 inch
Sheath Length select from: 6 for 6 inch 9 for 9 inch 12 for 12 inch 18 for 18 inch 24 for 24 inch
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.