These general purpose 2" long
sensors can be used in most liquid
and air applications. When used in
liquid environments, the epoxy-sealed
end should not be immersed directly into the liquid. Compression fittings are also
available for installation.
These probes can be used as stand-alone sensors,
or they can be configured with a variety of termination
options. When combined with controllers, indicators,
or precision thermometers they become the heart of complete
† All dollar amounts on this site are shown in US currency.
Note: Options: For leads longer than 40", add the desired length in inches to the model number and add $2.25/foot to the price. For 4 wire configurations change the "2" to a "3" in the model number and add $15 to the price (4-wire constructions are not available in 1/8" diameters). Terminations Available: For terminal lugs, add "-LUG" to the end of the model number and add $4.50 to the price. For 3-prong standard connectors, add "-OTP" to the model number and $7 to the price. For 3-prong miniature connectors, add "-MTP" to the model number and $7 to the price. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) PR-20-2-100-3/16-2-E-T 2", 3/16" diameter, 3-wire 100 Ω RTD probe with 40" PFA insulated lead wire, $66.00
Part Number Builder
Lead Wire Style
Select 2 for 3-Wire 3 for 4-Wire
Select 1/8 for 1/8 in 3/16 for 3/16 in 1/4 for 1/4 in
Select T for PFA insulation G for Fiberglass insulation
Select Nothing(leave field blank) for None -LUG for Terminal lugs -OTP for 3-Prong standard connectors -MTP for 3-Prong miniature connector
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.