Straight Probe Assembly, Cable Runs Directly to the Sensing Element (No Transition Fitting)
Contains a Precision 100 Ohm Class B DIN Platinum Thin Film Element
Temperature Range: -50 to 260ºC
Compact Design for OEM RTD Sensor Probe Applications
Available in 1/4", 3/16", 1/8" 3mm, 4.5mm and 6mmm Diameters, and Various Lengths.
2-, 3- or 4-Wire PFA Insulated, PFA Jacketed Cables
All Sensors Supplied to IEC60751/ASTM E-1137 Color Codes
Also Available With Fiberglass Insulated Cables (-GG) Fiberglass Cables With SST Overbraid (-SB) or Fiberglass Cables With BX Amored Hose (-BX). Fiberglass Cables have 500ºC Maximum Temperature, See Individual Product Sheets.
These general purpose platinum RTD sensor probes contain Omega's Platinum thin film RTD elements connected directly to PFA insulated and jacketed cable without the need for extension wires or metal transition fittings. This design makes for a more compact and reliable RTD replacement probe sensor where space limitations are a factor.
For this product with a fiberglass insulated and jacketed cable click this link. For this product with a stainless steel braided fiberglass insulated cable click this link. For this product with a fiberglass insulated cable and square locked hose click this link.
Order By Part Number
† All amounts shown in USD Note: Standard: To order probes in intermediate lengths (2" minimum), change length in model number and use next longer probe price. To order 2-wire sensors, change "-2" to "-1" in the model number at the same price. To order 4-wire sensors, change "-2" to "-3" in the model number and add $5 to the price. For probe lengths over 24", change length in model number and add $1 per inch of probe length. For cables longer than 40", add cable length to end of the model number and add $1 per foot. Metric: To order probes in intermediate lengths (50 mm minimum), change length in model number and use next longer probe price. For probe lengths over 600 mm, change length in model number and add $1 per 25 mm of probe length. For cables longer than 1 m, add cable length to end of model number and add $3 per meter. To order with shrink tube strain relief, specify “-ST” at end of model number at no additional charge. For MTP or OTP connectors, add “-MTP” or “-OTP” to model number and $8. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) PRTF-10-2-100-1/4-12-E 100 Ohm Class B DIN Platinum RTD with a 1/4, $39.00
Part Number Builder
Build Your Part Number Below
Probe Diameter select from: 1/8 for 1/8inch 3/16 for 3/16inch 1/4 for 1/4inch M30 for 3.0mm M45 for 4.5mm M60 for 6.0mm
Probe Length select from: 6 for 6 inches 12 for 12 inches 18 for 18 inches 24 for 24 inches 150 for 150mm 300 for 300mm 450 for 450mm 600 for 600mm
Note: All combinations may not be valid, check spec sheet for valid part numbers.