Probe Transition Includes a Strain Relief Spring at the Cable Exit
Contain Precision 100 Ohm, Class B DIN Platinum Thin Film Elements
Temperature Range -50 to 260ºC
Available in 1/4", 3/16", 1/8", 3mm, 4.5mm and 6mm Diameters and Various Lengths
Sensors supplied with 2-, 3- or 4-Wire PFA Insulated and Jacketed Cables
All Sensors Supplied to IEC60751/ASTM E-1137 Color Codes
Also Available With Fiberglass Insulated Cables (-GG) Fiberglass Cables With SST Overbraid (-SB) or Fiberglass Cables With BX Amored Hose (-BX). Fiberglass Cables have 500ºC Maximum Temperature, See Individual Product Sheets.
These RTD Probes are similar to our PRTF-10 immersion sensors except for the addition of a transition and strain relief spring. Manufactured with 100 ohm Class B DIN platinum thin film elements, these sensors provide a lower cost option to our "PR" line of RTD sensors and can be used in a wide variety of applications.
For this product with a fiberglass insulated and jacketed cable click this link. For this product with a stainless steel braided fiberglass insulated cable click this link. For this product with a fiberglass insulated cable and square locked hose click this link.
† All amounts shown in USD Note: Standard: To order 2-wire sensors, change "-2" to "-1" in the model number for the same price.To order 4-wire sensors, change "-2" to "-3" in the model number and add $5 to the price. To order probes in intermediate lengths (2" minimum), change length in model number and use next longer probe price. For probe lengths over 24", change length in model number and add $1 per inch of probe length. For cables longer than 40", add cable length to end of the model number and add $1 per foot. Metric: To order probes in intermediate lengths (50 mm minimum), change length in model number and use next longer probe price. For probe lengths over 600 mm, change length in model number and add $1 per 25 mm of probe length. For cables longer than 1 m, add cable length to end of model number and add $3 per meter. For MTP or OTP connectors, add "-MTP" or "-OTP" to model number and $8. (OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) PRTF-11-2-100-1/4-12-E 100 Ohm, Class “B” RTD with a 1/4, $41.00
Part Number Builder
Build Your Part Number Below
Sheath Diameter select from: 1/4 for 1/4 inch Diameter 3/16 for 3/16 inch Diameter 1/8 for 1/8 inch Diameter M60 for 6mm Diamater M45 for 4.5mm Diamater M30 for 3mm Diamater
Sheath Length select from: 6 for 6 inch Length 9 for 9 inch Length 12 for 12 inch Length 18 for 18 inch Length 24 for 24 inch Length 150 for 150mm Length 225 for 225mm Length 300 for 300mm Length 450 for 450mm Length 600 for 600mm Length
Note: All combinations may not be valid, check spec sheet for valid part numbers.