The PSDIN-41000R Series range of
power supplies are designed for
quick and trouble-free installation
onto 35 mm profile DIN rails. With
outputs ranging from 5 to 24V and
maximum current capabilities from
100 to 500 mA, these units are ideal
for most instrumentation and control
systems. Every model in the range
is provided with output current
foldback limiting and is fully shortcircuit
protected. Great attention has
been taken to usability and safety.
The double insulated housing
protects users without the need for
earthing. A green “supply on” LED is
provided to clearly indicate the
presence of power, and link
selection allows the use of 110 or
230V supplies without derating.
The PSDIN-42000B Series DIN rail
mounting power supplies are
supplied ready for connection. The
unit has only to be snapped on to
the 35 mm profile rail and
connected to the clearly marked
terminal screws. A status LED
indicates power is on. For increased
power two or more units may be
connected in parallel. The output of
these units is fully protected against
short circuits and overload.
SPECIFICATIONS Input: 115/230 Vac, 50/60 Hz Voltage Output: 5 Vdc, 200 mA to 24 Vdc, 500 mA Ripple and Noise: 5 mV PK-PK max Output Voltage Tolerance: ±0.5% max Load Regulation: ±0.05% for 50% load change Line Regulation: ±0.05% for 10% line change Isolation: Input to output 3750 Vac min Temperature Rating: Standard range 0 to 40°C (32 to 104°F) (full-rated, derated linearly to 40% at 70°C (158°F) Case Size: PSDIN-41000R Series: 119.2 L x 45 W x 73.2 mm H (4.69 x 1.77 x 2.88") PSDIN-42000B Series: 162 L x 105 W x 98 mm H (6.38 x 4.13 x 3.86") Case Material: PSDIN-41000R Series: Polycarbonate PSDIN-42000B Series: Steel housing with aluminum base Weight: PSDIN-41000R: 0.53 kg (19 oz) PSDIN-42000B: 2.49 kg (88 oz)
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) PSDIN-41245R DIN rail mounting linear power supply, $102.00
