Exceeding Max System Pressure values may cause a shift in the setpoint.
SWITCH RATING
MAX. RATING
AC/DC
VOLTS RESISTIVE
AMPS
AMPS INDUCTIVE CONTACTS
1 AMP SPDT
115/28
1/1
1/0.5
Gold**
5 AMP SPDT
250/28
5/5
5/3
Silver
**Use gold contacts for dry and TTL circuitry, ex. 5 Vdc @ 50 mA or less.
SPECIFICATIONS Approvals:UL (1 Amp switches PSW-520 and PSW-540 Series only) Process Temp: -55 to 105°C (-65 to 221°F) (2% setpoint shift can occur below -25°C [-13°F] or above 50°C [122°F]) Cycling: Not to exceed 20 cycles/min. Warranty: 3 year/1 million cycles Sensor: Piston (PSW-520 and PSW-540 diaphragm) Proof Pressure: 150% max. system pressure (PSW-530 and PSW-550 proof pressure is the max. system pressure) Wetted Parts: PSW-520 and PSW-540 Series: 17-7 pH SS, 303 SS and loctite sealing compound #271 PSW-530 and PSW-550 Series: 303 SS, 316 SS, Buna-N O-ring, loctite #271 PSW-560 and PSW-570 Series: 17-7 PH SS, 303SS, Buna-N O-ring, and loctite #271 Enclosure: Body: 303 SS Internal Switch Housing and Lock Ring: zinc alloy with chromate finish Cap: black valox Dimensions: PSW-520 and PSW-540: 66 L x 28 dia. mm (2.6 L x 1.06" dia.) PSW-560 and PSW-570: 71 L x 28 mm dia. (2.8 L x 1.10" dia.) Pressure Port: 1/8 -27 NPT Electrical Connection: 20 AWG, three polyvinyl insulated, unjacketed, 300 mm (12") pigtail leads Wiring Code: Black is common, white is N.O., red is NC (Vacuum models: red is NO, white is NC) Weight: 113 g (4 oz); PSW-520 and PSW-540 series, 85 g (3 oz)
Caution: Pressure switches are manufactured to the highest quality specifications. However, due to their economical construction, they should be used only for applications where, in the event of product failure, the risk of damage to equipment or personnel is minimal
† All dollar amounts on this site are shown in US currency.
Ordering Example: (1) PSW-535 20-500 psi switch, 5 Amp Silver plated contact and 5000 psi max pressure, $140.00