Very Low Differential Pressure for Air or Non-Conducting Gas, 4-20 mA Output Discontinued |
| PX2670I |
|
 |
|
|
|
|
|
|
|
| |
0.4% Accuracy Improves Energy Management Systems
|
| |
4-20 mA Output Is Compatible with Most 2-Wire Control Systems
|
| |
Optional 3 1 /2 -Digit LCD Dispplay
|
| |
IP65/NEMA-4 Enclosure
|
| |
11-Point Calibration Certificate Standard
|
|
|
| |
|
|
|
 |
"The PX2670 series has been discontinued. Please see the PX655{http://www.omega.com/pptst/PX655.html} as possible alternatives or contact our Pressure Engineering department."
OMEGA PX2670 Series pressure transducers sense either differential or gage pressure and convert this pressure to a highly accurate electrical signal. Used in building energy management systems, these transducers are capable of measuring pressures and flows with a high degree of accuracy to improve overall system efficiency. The units are temperature compensated to better than 0.33% FS/F over the range of 40 to 150F and have an IP65/NEMA-4 rated package to withstand environmental effects. A 31.2-digit LCD display is optional.
SPECIFICATIONS
Excitation: 24 Vdc nominal
Max: 30.0 + (0.004 x Loop Resistance .) Vdc
Min: 14.0 + (0.02 x Loop Resistance .) Vdc
Loop Resistance: 0 to 800 .
Output: 4-20 mA (2-wire) with internal zero and span adjustments
Accuracy: }0.4% FS at constant temperature (includes linearity, repeatability, and hysteresis)
Linearity: }0.33% FS
Hysteresis: 0.020% FS
Repeatability: 0.10% FS
Output Impedance: <100 .
Operable Temperature Range: 0 to 150F (-18 to 65C) Compensated Temperature Range: 40 to 150F (5 to 65C)
Thermal Span Effect: }0.033%FS/F
Sensor: Capacitance
Position Effects: Range Zero Offset (%FS/G) 0-10 inH2O .03 0-1 inH2O 1 0-0.1 inH2O 4
Maximum Line Pressure: 10 psi
Overpressure:
Negative Direction: 10 psi
Positive Direction: 10 psi
Wetted Parts: Air and non-conductive gas
Pressure Port: 3.16" OD tube fitting for 1.4" push-on tube
Electrical Connection: Internal Terminal Strip with Strain Relief
Weight: 11 oz (310 g)
|
| |
 |
|
 |
|
 |
† All dollar amounts on this site are shown in US currency.
Note: All models come with complete operators manual.
|
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
Part Number Builder |
 |
 |
 |
 |
 |
 |
|
|
|
Option Descriptions
|
|
(1)
|
Range (inH2O)
|
| |
Select 0.1 for 0-0.1 0.25 for 0-0.25 0.5 for 0-0.5 1 for 0-1 2.5 for 0-2.5 5 for 0-5 10 for 0-10 25 for 0-25 0.1B for ±0.1 0.25B for ±0.25 0.5B for ±0.5 1B for ±1 2.5B for ±2.5 5B for ±5
|
(2)
|
Display
|
| |
Select for Leave Blank For No Display -M for LCD Display
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
|
|
 |
|
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Related Links -
Related Products
|
 |
 |
 |
 |
 |
 |
|
Related Products
|
 |
DP24-E:
|
|
1/8 DIN Economical Process Meter
|
 |
 |
|
|
 |
DP41:
|
|
1/8 DIN High Performance Process Meter
|
 |
 |
|
|
|
 |
 |
|