These rugged stainless steel transducers are ideal for
industrial, automotive, or aerospace applications where
only one side of the transducer is exposed to wet
media. These wet/dry transducers deliver the great
performance characteristics of the Micro-Machined
Silicon Series Transducers at a lower price than the
wet/wet models. They can be used in test benches, filter
monitoring, air flow, factory or pneumatic air, pitot tubes,
air speed and other industrial or aerospace applications
requiring a very rugged wet/dry transducer. The solid
state silicon core will provide long, reliable service life
with excellent long term stability.
COMMON SPECIFICATIONS Accuracy: 0.08% BSL linearity, hysteresis and repeatability combined Minimum Resistance Between Transducer Body and Any Wire: 100 MΩ Operating Temperature: mV/V and 5 to 10 Vdc Output: -45 to 121°C (-49 to 250°F) mA Output: -45 to 115°C (-49 to 239°F) Compensated Temperature Range: 10 inH2O to 5 psi: -17 to 85°C (1 to 185°F) 15 to 1000 psi: -29 to 85°C (-20 to 185°F) Thermal Accuracy: Zero Span
% Span Shift over compensated temperature range 10 inH2O to 1 psi: ±1.00% ±1.00% 2.5 to 1000 psi: ±0.50% ±0.50% Pressure Cycles: 1 million minimum Long Term Stability (1-Year): ±0.1% FS typical Bandwidth: DC to 1 kHz typical Response Time: <1 ms CE Complient: Meets EN1326-1: 2006 for industrial locations Shock: 50 g, 11 ms, half-sine shock (under test) Vibration: ±20 g (under test) Media Compatibility: Positive Side: All fluids and gases compatible with 316L SS Negative Side: Clean, dry, non-ionic gases Line/Static Pressure: 500 psi max applied to both sides simultaneously Proof Pressure (Differential): 10 inH2O range = 10 times range
1 psi range = 6 times range
2.5 to 750 psi ranges = 4 times range
1000 psi range = 3 times range Hi Side Containment Pressure (Differential): Ranges 10 inH2O to 5 psi: to 1000 psi Ranges 15 to 1000 psi: to 3000 psi Pressure Ports: ¼NPT male Electrical Terminations: PX409: 2 m (6') cable PX409C: 2 m (6') cable with ½ NPT conduit thread PX419: Mini-DIN (mating connector included) PX429: Twist-lock, mating connector (sold separately) PX429 Mating Connector: PT06F10-6S Weight: 200 g (7 oz) max
UNI-DIRECTIONAL mV/V SPECIFICATIONS Output: 10 mV/V ratiometric Supply Voltage: 5 to 10 Vdc Current Draw: 5 mA @ 10 Vdc Input Impedance: 1000 to 5000 Ω Output Impedance: 5000 Ω ±10% typical Zero Balance: Ranges ≤ 1psi: ±1% typ (2% max) Ranges > 1psi: ±0.5% typ (1% max) Span Setting: Ranges ≤ 1psi: ±1% typ (2% max) Ranges > 1psi: ±0.5% typ (1% max)
UNI-DIRECTIONAL VOLTAGE OUTPUT SPECIFICATIONS Output Voltage/Supply Voltage: 0 to 5 Vdc/ 10 to 30 Vdc; 0 to 10 Vdc/15 to 30 Vdc (change "5V" to "10V" in model number) Current Draw: 10 mA max Maximum Current Output: 2 mA (= 2500 Ω min load resistance) Output Impedance: 100 Ω Zero Balance: Ranges > 1psi: ±0.5% typ (1% max) Ranges ≤ 1psi: ±1% typ (2% max) Span Setting: Ranges > 1psi: ±0.5% typ (1% max) Ranges ≤ 1psi: ±1% typ (2% max)
UNI-DIRECTIONAL mA SPECIFICATIONS Output: 4 to 20 mA Supply Voltage: 9 to 30 Vdc; [9 to 20 Vdc above 105°C (229°F)] Max Loop Resistance: (Vs-9) x 50 Ω Zero Balance: Ranges > 1psi: ±0.5% typ (1% max) Ranges ≤ 1psi: ±1% typ (2% max) Span Setting: Ranges > 1psi: ±0.5% typ (1% max) Ranges ≤ 1psi: ±1% typ (2% max)
Three Termination Styles are available: PX409 = 2 m (6ft) cable
PX419 = mini-DIN Connector PX429 = Twist-Lock connector
Still can't find the right model? Specify the perfect transducer for your application with this easy, step-by-step configurator.
† All dollar amounts on this site are shown in US currency.
Note: To order models with different electrical terminations, change model number to on of the following: PX409 = Cable Connection (featured in chart above) PX419 = mini-DIN Connection (mating connector provided) PX429 = Twist Lock Connector (mating connector sold separately) Additional Ranges Available See Part Number Builder (below) for the full selection of pressure ranges Ordering Example: (1) PX429-005DDU5V 5 psi wet/dry diff. pres. transducer with 0 to 5 Vdc output and twist-lock termination., (1) PT06F10-6S Mating twist-lock connector (sold separately) = $716.5
Part Number Builder
Option Descriptions
(1)
Electrical Termination
Select 09 for 2 m (6') cable 19 for mini-DIN 29 for Twist-Lock (mating connector sold separately)
(2)
Pressure Range (PSI)
Select 10W for 0-10 inH2O 001 for 1 psi 2.5 for 2.5 psi 005 for 0-5 psi 015 for 0-15 psi 030 for 0-30 psi 050 for 0-50 psi 100 for 0-100 psi 150 for 0-150 psi 250 for 0-250 psi 500 for 0-500 psi 750 for 0-750 psi 1.0K for 0-1000 psi
(3)
Units
Select DDU for Wet/Dry Differential Pressure DWU for Wet/Wet Differential Pressure
(4)
Output
Select V for 10 mV/V Output 5V for 0-5 Volt dc Output 10V for 0-10 Volt dc Output I for 4-20 mA Output
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
