OMEGA’s PX41 Series consists of
high-accuracy, low-cost pressure
transmitters. Their sealed, all
stainless steel construction makes
them suitable for the harshest
environments. They are available
in gage, absolute, or sealed gage
models. Ten feet of PVC insulated
shielded cable is standard, or a
Bendix style connector is also
available. A wide selection of
amplified voltage and current
outputs makes the PX41 a truly
versatile family of industrial
transmitters.
The PX41 is also available in metric configurations, with G1/4 or G1/8 ports, and models from 0-1 to 0-400 bar pressure ranges.
Please see the PXM41 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS 4 to 20 mA Output Excitation: 10 to 40 Vdc Output: 4 to 20 mA (±10% adj) Zero Balance: 4 mA +10% -2% adj MSHA: Mine Safety and Health Administration—optional. Must be specified at time of order. Accuracy: 0.25% linearity, hysteresis and repeatability combined Sensing Element: 4-active-arm bridge with hermetically sealed thick-film strain gages Operating Temp Range: -47 to 121°C (-50 to 250°F) Compensated Temp Range: 16 to 71°C (60 to 160°F) Thermal Effects: Span: 0.003% rdg/°F Zero: 0.005% FSO/F Proof Pressure: 150% of rated pressure Burst Pressure: 300% of rated pressure Wetted Parts: 17-4 PH and 316 SS Pressure Port: <10,000 psi: ½-14 NPT external, ¼-18 NPT internal ≥10,000 psi:9⁄16-18, ¼" HP tube Electrical Connections:
Style "0" = 3 m cable
Style "1" = PTIH-10-6P connector
Style "6" = micro DIN
See Custom Configurations Mating Connector:
Style "1" = PT06F-10-6S, sold separately
Style "6" = included Weight: 170 g (6 oz) FM Option S/I/1/ABCD: requires installation with conduit. Models do not have external zero or span and are available in Sealed-Gage or Absolute pressure ranges only. Must be specified at time of order.
† All dollar amounts on this site are shown in US currency.
Note: NIST Traceable Calibration Certificate Included For Metric Threads and Ranges please see the PXM41-I Series For complete product specifications see the Related Links section at the bottom of this page.
Ordering Example: (1) PX41T0-100GI is a 100 psi gage transmitter with 10 ft cable and 4-20 mA output, $480.00
Part Number Builder
Option Descriptions
(1)
Pressure Port
Select T for Dual 1/2-14 NPT External - 1/4-18 Internal C for 1/4-18 NPT-M D for 1/4-18 NPT-F S for 1/4 HP Tube Fitting(Greater than 10K psi only) K for 7/16-20 UNF-F(Greater than 10K psi only)
(2)
Electrical Connection
Select 0 for 10' pigtail (+$2/ft over 10') 1 for PT1H-10-6P Twist Lock Connector (or equal) 5 for Lightning Protected
Amplifier Housing(no charge)(4-20 mA model only) 6 for mini DIN Connector
(3)
Range (psi)
Select 010 for 0-10 015 for 0-15 020 for 0-20 025 for 0-25 030 for 0-30 050 for 0-50 075 for 0-75 100 for 0-100 200 for 0-200 300 for 0-300 500 for 0-500 750 for 0-750 1K for 0-1000 1.5K for 0-1500 2K for 0-2000 2.5K for 0-2500 3K for 0-3000 3.5K for 0-3500 5K for 0-5000 7.5K for 0-7500 10K for 0-10000 15K for 0-15000 20K for 0-20000 30K for 0-30000
(4)
Units
Select G for Gage Model S for Sealed Gage Model A for Absolute Model
(5)
Output
Select I for 4 to 20 mA Output 5V for 0.5 to 5.5 Vdc Output 5T for 0 to 5 Vdc Output 10V for 0.5 to 10.5 Vdc Output 10T for 0 to 10 Vdc Output
(6)
Options
Select for No Options -FM for FM Hazardous Location +$150 (cable style 4-20mA output Sealed or Absolute only) -MSHA for Mine Safety and Health Admin. (0.5 to 5.5V or 4-20 mA output) -OX for Cleaned for Oxygen use +$75
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
