Rugged Solid State Pressure Transmitters |
| PXM209 and PXM219 Metric Series |
|
 |
|
|
General Purpose Pressure Transmitters
 |
| Click for larger image. |
|
|
$
215.00
PXM209-006G10V
|
| • |
Stainless Steel Fitting and Body
|
| • |
0 to 10 Vdc, 4 to 20 mA Outputs Standard
(0 to 5 Vdc Optional)
|
| • |
Solid State Media Isolation Suitable for Use with Many Industrial Liquids and Gases
|
| • |
Broad Temperature-Compensated Range of -20 to 80°C
|
| • |
Rugged High Shock and Vibration Design for Tough OEM Applications
|
View related products - Pressure Transducers
|
| |
|
|
|
 |
OMEGA’s PXM209 Series general purpose pressure
transmitters are accurate, highly
reliable general purpose voltage
and current output transducers suitable for harsh
industrial equipment applications.
Their high performance is a result
of the soild state full bridge construction which
uses a micro-machined diffused
silicon diaphragm and unique
thin-film media with dielectric
isolation barriers. The proprietary
ASIC provides a wide temperature
compensation including tight
tolerances for zero balance
and span.
The PXM209 is also available in standard/imperial configurations, with 1/4 NPT ports, and models from 0-15 to 0-300 psi pressure ranges.
Please see the PX209 for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
0 to 10 Vdc Output
Excitation: 24 Vdc @ 15 mA (12 to 35 Vdc)
Output: 0 to 10 Vdc ±1.5% (3 wire)
Zero Balance: 0 Vdc ±2% FSO
4 to 20 mA Output
Excitation: 24 Vdc (7 to 35 Vdc)
reverse polarity protected
Output: 4 to 20 mA ± 1% FSO (2 wire)
Zero Balance:4 mA ± 2% FSO
Max Loop Resistance:
50 x (supply voltage - 10)
Common Specifications
Accuracy: 0.25% FS (including
linearity, hysteresis and repeatability)
Operating Temperature:
-54 to 121°C
Compensated Temperature:
-20 to 80°C
Thermal Effects:
0.04% FS/%°C
Proof Pressure: 150%
Burst Pressure: 300% range max
Response Time: 2 ms typical
Vibration Sensitivity: At 20 g peak
sinusoidal vibration from
10 Hz to 2000 Hz (12 mm D.A.), the
output shall not exceed 0.04% FS/g for
1 bar range to 0.005% FS/g for 7 bar and above
Natural Frequency: >35 kHz for 7 bar range
Gauge Type: Diffused silicon strain gauges
Wetted Parts: 316 SS, borosilicate
glass, silicon nitride, epoxy
Pressure Port: G 1/4 A male
Electrical Connections:
PXM209: 1 m shielded
4-conductor cable
PXM219: DIN 40050 plug
connector supplied
Weight: 128 g
Examples of pricing for popular models is referenced in
the "To Order" box. Use the "Part Number Builder" below to get pricing
for all available models.
|
| |
|
|
|
|
|
† All dollar amounts on this site are shown in US currency.
Note: Supplied with NIST Traceable Calibration Certificate
Ordering Example: (1) PXM219-006G10V 0 to 6 bar, gage pressure, DIN Connector Style with 0 to 10 Vdc Output, $215.00
|
|
|
|
|
|
|
|
 |
|
 |
|
|
Part Number Builder |
|
|
|
|
|
 |
|
|
|
|
|
Option Descriptions
|
|
(1)
|
Termination
|
| |
Select
09 for 1 m Cable
19 for DIN Connector
|
(2)
|
RANGE (bar)
|
| |
Select
VAC000 for -1 to 0
VAC001 for
-1 to 1
VAC003 for -1 to 3
VAC006 for -1 to 6
VAC009 for -1 to 9
001 for 0 to 1
1.60 for 0 to 1.6
2.50 for 0 to 002.5
004 for 0 to 4
006 for 0 to 6
010 for 0 to 10
016 for 0 to 16
020 for 0 to 20
|
(3)
|
Type
|
| |
Select
A for Absolute Pressure
G for Gage (Relative) Pressure
|
(4)
|
Output
|
| |
Select
10V for 0 to 10 Vdc
I for 4 to 20 mA
5V for 0 to 5 Vdc
|
|
NOTE: All combinations may not be valid, check spec sheet for valid part numbers.
|
| | |
|
|
|
|
|
| |
|
|
|
|
|
|
 |
|
|
|
Related Links -
Related Products
|
|
|
|
|
|
|
|
|
|
Related Products
|
 |
PX209 and PX219:
|
|
Solid State Pressure Transducer, 0 to 5 Vdc or 4 to 20 mA Outputs, Vacuum to 300 psi Ranges
|
|
|
|
|
 |
DP41-B:
|
|
1/8 DIN Ultra High Performance Meter, Temperature, Thermocouple, RTD, Strain, Process
|
|
|
|
 |
DP25 Series:
|
|
Temperature, Process, Strain, pH or ORP Meters with Optional Relays, Analog Outputs and Display Options
|
|
|
|
|
|
|
 |
|
|
