Omega SMPW thermocouple connectors are mini size flat 2 pin TC connectors designed to connect temperature sensor instrumentation and a temperature controller or process control HMI automation panel. Male 2 pole TC plugs and matched female 2 prong TC jack pairs are stock items. Standard size round pin OSTW plugs, jacks and thermocouple TC connectors are also available - see related products below. Accessories for wire, crimp, cable clamp, grommet and strain relief are in the accessories link.
SMPW is manufactured as a form fit replacement for the legacy SMP model.
Check out our latest design - SMPW-CC Series with integral cable clamp. in related products.
Installation Note: for HMPW-x-F
When using the rivet hole as a hold down point the maximum screw size is
3-48-NC or M2.5 x .45 Maximum Torque Value is 2 pounds-force inch or .230 kilogram-force meter .
† All amounts shown in USD
Part Number Builder
Build Your Part Number Below
Connector Body select from: SMPW for Glas-Filled Nylon w/Window HMPW for Liquid Crystal Polymer w/Window
Thermocouple Calibration select from: K for K Thermocouple J for J Thermocouple T for T Thermocouple E for E Thermocouple R/S for R/S Thermocouple G for G Thermocouple C for C Thermocouple D for D Thermocouple U for Uncompensated or B Thermocouple N for N Thermocouple
Connector Contacts select from: M for Male Connector Only F for Female Connector Only MF for Male Female Pair
ROHS select from: Nothing(leave field blank) for Non-ROHS -ROHS for ROHS
Note: All combinations may not be valid, check spec sheet for valid part numbers.